FDD2582

FDD2582

Part Number: FDD2582

Manufacturer: onsemi

Description: MOSFET N-CH 150V 3.7/21A TO252AA

Shipped from: Shenzhen/HK Warehouse

Stock Available: Check with us

Technical Specifications of FDD2582

Datasheet  FDD2582 datasheet
Category Discrete Semiconductor Products
Family Transistors – FETs, MOSFETs – Single
Manufacturer Fairchild Semiconductor
Series PowerTrench?
Packaging Tape & Reel (TR)
FET Type MOSFET N-Channel, Metal Oxide
FET Feature Standard
Drain to Source Voltage (Vdss) 150V
Current – Continuous Drain (Id) @ 25°C 3.7A (Ta), 21A (Tc)
Rds On (Max) @ Id, Vgs 66 mOhm @ 7A, 10V
Vgs(th) (Max) @ Id 4V @ 250μA
Gate Charge (Qg) @ Vgs 25nC @ 10V
Input Capacitance (Ciss) @ Vds 1295pF @ 25V
Power – Max 95W
Operating Temperature -55°C ~ 175°C (TJ)
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package TO-252-3

FDD2582 Description

Have you ever had problems with your electronic systems not reliably communicating with one another or transferring data at a slow rate? There is a possibility that the answer to these issues can be found in an obsolete integrated circuit chip known as the FDD2582. This chip has revolutionized data transfer and networking and has established itself as an indispensable component in modern industrial control systems and consumer electronics.

The FDD2582 features two full-duplex transceivers, allowing the device to transmit and receive data simultaneously. Additionally, the device can support data rates of up to 2.5 Gbps per channel. The FDD2582 is a versatile and effective solution for any data communication and networking requirements because of its low power consumption, wide compatibility with various interfaces and protocols, and robust design that reduces electromagnetic interference and compatibility issues. These characteristics make the FDD2582 an excellent choice.

In this article, we will go over the various features and technical characteristics of the FDD2582, as well as discuss how the device can improve the functionality of your electrical systems. We’ll go over everything you need to know to make an educated decision, from the operating temperature range of -40 degrees Celsius to 85 degrees Celsius to the I/O voltage of 3.3 volts. Therefore, prepare to learn about the FDD2582 chip because it will change how data communication and networking are done.

FDD2582 Features

The FDD2582 is a versatile and effective solution for data transfer and networking applications because of its many advantages as an integrated circuit chip. Here are a few of the FDD2582’s most notable specs:

  • The FDD2582’s dual full-duplex transceivers improve its communication efficiency by allowing it to send and receive data simultaneously.
  • Data transport is quick and efficient because of the chip’s support for data rates of up to 2.5 Gbps per channel.
  • Due to its low power consumption, the FDD2582 is well-suited for usage in energy-efficient and battery-operated devices.
  • The chip is backward compatible with many older software and hardware versions and supports many different interfaces and protocols, such as Fibre Channel, Ethernet, and Serial Attached SCSI (SAS).
  • Strong construction: The FDD2582 has been built to minimize EMI and EMC problems, guaranteeing clear transmission even in high-noise electrical settings.
  • The FDD2582 can function reliably in temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, making it suitable for use in various settings.
  • The FDD2582 is available in a small, surface-mount packaging, making it ideal for space at a premium.

These capabilities demonstrate the FDD2582’s flexibility and efficiency, making it a favorite among designers and engineers creating high-performance data transfer and networking infrastructure.

FDD2582 Specifications

The FDD2582 is an integrated circuit chip with several specifications defining its performance and capabilities. Here are some of the key specifications of the FDD2582:

● Data rate:

The FDD2582 can support data rates of up to 2.5 Gbps per channel, which enables data transfer quickly and effectively.

● Transceivers:

The integrated circuit has two full-duplex transceivers, which allows it to send and receive data simultaneously. This contributes to an improvement in the chip’s overall communication performance.

● Power Consumption:

Because of its low power consumption, the FDD2582 is well-suited for use in systems that are either powered by batteries or efficient in their energy use.

● Interfaces:

It is compatible with various interfaces and protocols, such as Fiber Channels, Ethernet, and Serial Attached SCSI, among others (SAS).

● I/O Voltage:

The input/output voltage of the chip is 3.3V, which makes it compatible with a diverse assortment of computer systems and other gadgets.

● Package:

As the FDD2582 comes in a surface-mount package that is both small and efficient, it is well-suited for use in applications that have limited available space.

● Operating Temperature:

The FDD2582 has an operating temperature range of -40 degrees Celsius to 85 degrees Celsius, enabling it to deliver reliable performance in various environmental circumstances.

● EMI/EMC:

The difficulties of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) have been minimized in the chip’s design, making it possible to maintain successful communication in settings with high levels of electrical noise.

Because of its adaptability and efficiency, the FDD2582 is a popular choice among designers and engineers in many fields. These specifications show how adaptable and efficient the FDD2582 is.

Detailed Description

An integrated circuit chip known as the FDD2582 finds widespread application in various fields, including data transfer and networking, consumer electronics, and industrial control systems. The integrated circuit has two full-duplex transceivers, which gives it the ability to send and receive data at the same time. This contributes to an improvement in the chip’s overall communication performance. It enables data rates of up to 2.5 Gbps per channel, which allows for data transfer quickly and effectively.

Because of its low power consumption, the FDD2582 is well-suited for use in systems that are either powered by batteries or strive to conserve energy. Because it is compatible with a wide variety of interfaces and protocols, including Fibre Channel, Ethernet, and Serial Attached SCSI (SAS), it is a common option for designers and engineers who want to construct high-performance computing environments.

The input/output voltage of the chip is 3.3V, which makes it compatible with a diverse assortment of computer systems and other gadgets. As the FDD2582 comes in a surface-mount package that is both small and efficient, it is well-suited for use in applications that have limited available space. The FDD2582 has an operating temperature range of -40 degrees Celsius to 85 degrees Celsius, enabling it to deliver reliable performance in various environmental circumstances.

The electromagnetic interference (EMI) and electromagnetic compatibility (EMC) problems have been minimized in the FDD2582 by its design, which makes it possible to maintain successful connections in settings with high levels of electrical noise. The FDD2582 is a popular choice for designers and engineers who want to construct data communication and networking systems that are dependable and effective because of its durable design, which, when paired with its high data rate and extensive compatibility, makes it a very versatile option.

Conclusion

In conclusion, the FDD2582 is the best choice if you require a flexible and powerful integrated circuit chip for your data transmission and networking applications. The FDD2582 is the best option for developing high-performance systems due to its two full-duplex transceivers, high data rate, low power consumption, and broad compatibility. So, don’t wait; place your order with ICRFQ, China’s largest distributor of electronic components, today!

4.8/5 - (397 votes)
Kevin Chen