Last Updated on October 22, 2023 by Kevin Chen
Image source howtofix
Your cooking experience is no longer as smooth as it should be.
The main cause is the circuit breaker.
Your stove keeps tripping the breaker, making it difficult to cook as usual.
What could be the most probable cause for this?
Read on as we analyze the most probable reasons why your stove keeps tripping the circuit breaker.
Top reasons why the stove trips the breaker
There are any wires that are connecting your stove to the circuit breaker.
A simple mistake in the wiring can cause constant tripping of the circuit breaker.
So, the constant tripping of the circuit breaker could be due to bad wiring.
So how do I solve this?
Check out the wiring and connections on the stove.
You can use a manufacturer’s manual or any other technical documentation about the stove that you are using.
If the wires are old or worn out, then you should consider buying new ones.
Ensure that the new wires are of premium quality and are recommended to be used on the stoves.
It will also be wiser to let a professional electrician to do the wiring.
This could be one of the reasons why your stove keeps tripping the circuit breaker.
If the stove is damaged and you are still using it, then there could be some serious issues about to occur.
When such damage occurs, then the stove will not work properly and hence it will consume more power.
A faulty stove is also likely to draw more current than what it is supposed to.
And this extra consumption of power will cause tripping of the circuit breaker.
So, how do we solve this?
If you think that your stove is damaged, then you should replace it with a new one immediately.
You can also hire a stove expert to inspect your stove.
There are many options available in the market for you to choose from. Always go for a high-quality and durable product.
You can also consider getting a new one from your local stove store if you own any one. It is better to purchase a high quality stove so that it does not cause any problems later on down the line.
Ground fault occurs when there is a leakage between the neutral and ground wire.
The problem is likely to occur if your stove is directly connected to the GFCI outlet.
There are many reasons that could cause the ground fault.
It could be caused by a wiring problem or the stove itself. This is one of the common causes of circuit breakers tripping when you use your stove.
So, how do we solve this?
If your circuit breaker keeps tripping when you use your stove, then you should check for ground faults immediately.
If there is any problem with your wiring, then it should be fixed as soon as possible to avoid any further damage.
Damaged circuit breaker
The constant tripping could be due to the faulty circuit breaker that is connected to the stove.
A damaged circuit breaker is likely to trip constantly even when there is no overload or shorting of the circuit.
One of the first moves is to confirm the state of the breaker.
Does it exhibit any signs of damage? If so, proceed to replace it.
Buy a better breaker from a reputable manufacturer.
Also, check the rating of the breaker. It should match the power requirement of your stove.
The constant tripping of the breaker could be due to the expected cause: circuit overload.
If your circuit breaker trips when you use your stove, then it could be due to the high current demand of your circuit.
The circuit overload could be due to a certain appliance, such as a large-scale water heater, or other equipment.
As a rule of thumb, the maximum current should not exceed 40% of the rating of the circuit breaker.
It is recommended to disconnect the circuit breaker and measure its load current with an ammeter (you may need an ammeter adapter). If it exceeds 40% of the rating, then it is time to replace the breaker.
If this is not possible, then you can reduce or eliminate appliances that are using too much power and use only what is absolutely necessary.
Underpowered circuit breaker
The constant tripping could be because you are using a breaker whose power rating is way below the one recommended for the stove.
For instance, if your stove has a rating of 15 amps, then the circuit breaker should have a power rating of at least 20 amps.
If you are using a circuit breaker rated for 10 amps, then it could trip at times.
In this case, you need to replace the circuit breaker and get one with a higher power rating.
What circuit breaker do I need for stove?
We have just said that some of the reasons why your circuit breaker keeps tripping is a weak breaker or damaged breaker.
The best solution to these problems is to buy new circuit breakers.
But, which is the right circuit breaker for my stove?
A 50 amp breaker will be suitable for most stoves that we use in homes.
For smaller stoves, the circuit breakers should range between 30A to 40A.
However, industrial stoves will definitely require larger circuit breakers.
Check the circuit breaker brand
You should also be keen on where you are buying the circuit breaker.
Choose the best brands: reputable circuit breaker manufacturers and suppliers.
This way, you will be sure of getting the best from your breaker.
It will serve you perfectly without constant tripping.
If you are buying a circuit breaker in China, consider using the services of a sourcing agent. For instance, we at ICRFQ will connect you to the best circuit breaker manufacturers in China.
At this point, you know the possible reasons why your stove circuit breaker keeps tripping.
You can easily identify the cause and work on the most appropriate solutions.
In case of a replacement, ensure that you buy quality or better products.
And if you are going to do any installation or inspection, involve an expert.
If you want to find more Electronic Components Distributors, please check out the following articles:
- The Art of Sourcing: How We Identify and Partner with Top IC Manufacturers - November 24, 2023
- Essential Electronics Test Equipment You Should Know About - November 24, 2023
- How To Finish PCBA Design Process Quickly? - November 24, 2023