Electronic connectors

Electronic connectors are used in a wide range of electric devices and appliances. They are mainly used for connecting wires and cables. If you specialize in manufacturing different electronics, the connectors are just one of the components that you will be buying.

The electronic connectors that we are going to look at in this article are those that you can find as a part of your electronic devices and appliances.

Electronic connectors have been around for decades now, but they still remain just as important as they were when they were first used.

But, before you proceed to buy electronic connectors, here is a guide for you.

We are going to look at everything that you should know about electronic connectors.

What is meant by connectors in electronics?

Electronic connectors are parts or components that are used for connecting and disconnecting circuits. They can easily be connected and disconnected by hands or any other simple tools that you have. In short, you won’t need a complex device to handle the connectors.

What electronic connectors do

Now that you know what electronic connectors are, it is time to take a look at their main function. The electronic connector should be able to connect electronic devices and appliances together. They should also be able to connect the electronic circuits of these appliances without compromising on voltages or current levels.

When you buy electronic connectors or electronic components, make sure that you check the electrical and physical characteristics of the electronic connector. This is vital because electronic connectors that do not comply with the minimum standard can cause problems

Electronic connectors should also be able to make mechanical and electronic connections. These electronic connections must be long-lasting and durable as well. Some electronic devices and appliances require specific electronic connectors, so make sure you buy them accordingly.

Connectors come in different shapes and sizes, but they all function similarly – making electronic connections between components of your electronic device or appliance.

Different types of electronic connectors

There are many types of electronic connectors, but some of the most common ones include:

-Board-to-board

-Wire-to-board connectors

-wire-to-wire connectors

We are going to look at each of these types of electronic connectors and what they do.

Board-board-connectors

Board-board connectors

These are connectors that are used without cables or wires. They are used to connect electronic boards or circuit boards. The electronic connectors are soldered directly to the electronic board. They can also be connected through traces on electronic boards.

Board-board electronic connector solderless connections are made by using Pogo pins. These pins have good conductivity and a strong spring force that holds the pin in place while making good contact. However, electronic cables are not reliable because of their tendencies to get disconnected or broken.

Several factors have to be considered when choosing board-to-board connectors. For example, the electronic connector should be able to withstand high temperatures. It should also be easy to stack electronic boards together and ensure that they remain connected after stacking.

Another consideration is the size of electronic connectors because some electronic connectors are larger than others. You can find electronic connectors as large as 40 mm wide or as small as 1 mm wide.

Wire-to-board electronic connectors

Wire-to-board electronic connectors

This is one of the most common electronic connectors that are found in electronic devices. The electronic connectors are similar to the ones that you find on your electronic board, but they are basically electronic cables.

They can be used multiple times after connecting and disconnecting them from electronic circuits. Sometimes you will need to use electronic connectors because electronic boards are mounted in hard-to-reach places.

In an electronic device, wire-to-board electronic connectors are used to connect electronic circuits that have different power requirements. If electronic boards need more current or voltage, then you can use electronic connectors to power up the circuits.

Wire-to-wire electronic connectors

This is a type of electronic connector that is made from wires and cables. They are usually used in electronic devices that have electronic boards that need to be connected.

The electronic connectors can come in different shapes and sizes, but they all work similarly to make electronic connections between electronic circuits found on electronic boards.

An advantage of wire-to-wire electronic connectors is that they are flexible and easy to use. They also allow for electronic connections that are easy to make and disconnect. These electronic connectors are low-cost, which makes them affordable for electronic devices.

Connector housings

Connector housings basically help electronic connectors to function properly inside electronic devices or appliances. Connector housings can shield electronic connectors from outside factors that might interfere with the electronic connection. They also allow for easy electronic connections to electronic circuits.

Male and Female Connectors

Male and Female Connectors

Electronic connectors can also be classified as male and female connectors. This is because electronic connectors can be categorized as male or female electronic devices.

Male electronic connectors

These electronic connectors are also called plug electronic connectors. They basically allow electronic signals to pass through without stopping them. Male electronic devices usually connect with female electronic devices to complete an electronic connection, which is why they are called plugs and sockets connectors. These electronic connectors are usually sold as electronic kits.

They make electronic connections with electronic devices and electronic circuits that have three to five pins, which is why they are used in an electronic breadboard.

If you need to connect electronic boards with high speed and low noise interference then male electronic devices should be used for your electronic circuits.

Female electronic connectors

Female electronic connectors are also called sockets electronic connectors. They basically receive electronic signals from male electronic devices. These electronic connectors can be used as input and output ports for electronic boards or electronic devices. Female electronic devices can contain three, four, five pins, or more than five pins depending on the need of your circuit connection.

You should use female electronic devices for electronic circuits that need more power. Female electronic connectors are also used on an electronic breadboard to make electronic connections with male electronic devices.

Physical Attributes of Connectors

Material

Electronic connectors are built of different materials. Some electronic connectors are made from plastic, while others electronic connectors are made of metal. The material used to create electronic connectors is usually chosen based on the purpose of use and the function of electronic devices.

Color

Electronic connector housings also come in different colors. Electronic connector housings allow users to distinguish between male and female electronic devices.

Design and shape

Electronic connectors can be shaped and designed in different shapes and sizes. These electronic connectors depend on the electronic devices that need them to connect within electronic circuits. Electronic connector housings also come in different shapes and sizes, but they all work similarly to make electronic connections between electronic boards and electronic devices.

Mechanical features of electronic connectors

Here are some of the mechanical features that you should know about connectors.

Locking mechanism

Locking mechanism

Electronic connectors have a locking mechanism that makes an electronic connection. This allows electronic signals to pass through electronic devices without stopping them.

Without this feature, electronic circuits wouldn’t work properly and users would not be able to connect electronic boards with electronic devices.

Detachable design

You can also detach electronic connections that are made by certain electronic connectors easily. Electronic connectors that have detachable electronic connections are called breakaway electronic connectors, which are useful for electronic circuit designers.

Keying

electronic connectors also come in different keyed versions, which means electronic boards and electronic devices can only be connected in certain ways. This is to keep electronic connections compatible with electronic devices that use the same type of electronic connector connection.

Insertion force

You should not apply too much force when inserting electronic signals through electronic connectors because it might break electronic circuits and electronic connections.

Contact resistance

electronic connectors also have contact resistance, which is the energy that electronic devices use to move electronic signals from electronic boards. This is because contact resistance has lower resistance than wire or cable.

Insulation

Insulation covers electronic connectors and prevents people from touching them easily. This stops users from electronic signals that electronic connectors carry.

Cable shielding

Electronic connectors also come with cables, shields, and sheaths to protect electronic connections made by electronic devices. Shields are usually covered with rubber or any other type of insulating material. This shield hermetically protects electronic boards and electronic devices from outside electronic interference.

Backshells

electronic connectors also have backshells to support electronic connections, electronic boards, and electronic devices. Backshells are usually made of metal.

Strain relief

electronic connectors also come with strain relief features, which prevent electronic circuits from breaking because of pressure put on electronic interconnections between electronic boards and electronic devices. This is done by putting electronic connectors under stress.

Mating cycles

electronic connectors also have mating cycles, which are the number of times electronic connections can be made before wearing down electronic connector housings. Mating cycles usually last between 500 to 50,000 electronic connections.

Methods of connections for the electronic connectors

When buying electronic connectors in China, it is important to consider the methods of connections that will be used. Some of these methods include;

Crimp-on connection

Some electronic connectors have this connection, which is used to attach electronic wires. This method is the most common electronic connector connection because it is cheap and easy to use.

Screw connection

Some electronic connectors have this type of electronic connection as well, which uses a screwing motion to attach electronic wires.

Solder Connection

Electronic connectors also have electronic connections that solder electronic wires to electronic boards.

Bolt connection

Quite a good number of electronic connectors also have electronic connections that are bolts, which are screwed onto electronic boards.

Blade connection

Electronic connectors are also equipped with electronic connections that use blade electronic circuits. These electronic connections hold electronic blades in place on electronic boards.

Push-on connection

This is not very common among most electronic connectors but still exists. Electronic wires are pushed into electronic connection housings to make this type of electronic connection.

Faston connection

Electronic connectors have electronic connections that use a spring pressure mechanism to attach electronic boards.

What is the price of electronic connectors?

Prices of electronic connectors depend on many factors. Some of these factors include;

The electronic connector connection type

Electronic connectors that use different electronic connections have different prices because electronic connectors that are suited for electronic boards with different purposes have to be used.

The method of connections also determines the price of electronic connectors, which is why electronic connectors that use electronic connections such as solder connections cost more than electronic connectors that use electronic connections such as the crimp-on connection.

The electronic connector housing quality

electronic connectors may have different housings, which influence their prices. Electronic connectors with better electronic board housings are usually more expensive because they last longer and can withstand wear and tear from use.

The electronic connector brand

The brand of electronic connectors also influences their prices. Electronic connectors that come from electronic companies with a good reputation in electronic technology and in electronic connector manufacturing usually cost more than electronic connectors that come from electronic companies with a bad reputation.

The electronic connector size

Electronic connectors can have different sizes, which is why some electronic connectors are more expensive than electronic connectors of other electronic sizes.

Electronic connector size is also part of the factors that influence electronic connector prices because electronic connectors that have electronic board housings that are smaller or bigger than electronic connector housings that are usually small or big can be more expensive.

The electronic connector color

Electronic connectors come in different colors, which also means that electronic connectors of different electronic colors cost more than electronic connectors of other electronic colors.

The electronic connector material

Electronic connectors are made of alloys, plastics, and metals. Electronic connectors may be made of different materials with different prices because not all materials used to make electronic connectors are the same; some may cost more than electronic connectors of other electronic materials.

The electronic connector current

Electronic connectors have different current ratings, which influence their prices because electronic connectors that have higher currents are more expensive than electronic connectors with lower currents.

The electronic connector voltage rating

Electronic connectors have different electronic voltage ratings, which is why some electronic connectors cost more than electronic connections of other electronic voltage ratings.

The electronic connector niche

Electronic connectors are made for electronic boards with different purposes, which is why electronic connectors that are made to be used in electronic boards with high-powered electronic devices cost more than electronic connectors that are made to be used in electronic boards with low-powered electronic devices.

electronic connector

ICRFQ: Reliable Electronic Connectors Distributor In China

In case you would want to buy electronic connectors in China, we are the people that you should talk to. ICRFQ electronic connector is a reliable electronic connectors supplier in China that has electronic connectors that are made to be used with electronic boards and electronic devices for all kinds of electronic purposes.

The quality of our electronic connectors is guaranteed because we only use the best materials and best methods to produce our electronic connectors. Our prices may also not be as expensive as you think because we also offer electronic connectors at wholesale prices. If you are interested in our electronic connector products, please visit our official website today!

4.7/5 - (317 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment