Technical Specifications of AD7927BRUZ-REEL7

Datasheet	AD7927BRUZ-REEL7 datasheet
Category	Integrated Circuits (ICs)
Family	Data Acquisition – Analog to Digital Converters (ADC)
Manufacturer	Analog Devices Inc.
Series	–
Packaging	Tape & Reel (TR)
Part Status	Active
Number of Bits	12
Sampling Rate (Per Second)	200k
Number of Inputs	8
Input Type	Single Ended
Data Interface	SPI, DSP
Configuration	MUX-S/H-ADC
Ratio – S/H:ADC	1:1
Number of A/D Converters	1
Architecture	SAR
Reference Type	External
Voltage – Supply, Analog	2.7 V ~ 5.25 V
Voltage – Supply, Digital	2.7 V ~ 5.25 V
Features	–
Operating Temperature	-40°C ~ 85°C
Package / Case	20-TSSOP (0.173″, 4.40mm Width)
Supplier Device Package	20-TSSOP

Introduction

The AD7927BRUZ-REEL7 is a flexible 12-bit Analog-to-Digital Converter (ADC) that provides high-speed, low-power performance in a variety of applications. In this detailed article , we’ll look into the AD7927BRUZ-REEL7’s essential features, characteristics, and usage scenarios to help you learn how to get the most out of this precise analog-to-digital converter.

Key Features of AD7927BRUZ-REEL7

The AD7927BRUZ-REEL7 is a highly adaptable 12-bit analog-to-digital converter (ADC) with a variety of features that make it suitable for a wide range of applications. Here are some of its important features:

● Fast Throughput Rate: 200 kSPS

The AD7927BRUZ-REEL7 offers a rapid throughput rate of 200 kSPS (kilo samples per second), ensuring swift data conversion.

● Specified for AVDD of 2.7 V to 5.25 V

This ADC operates within a wide voltage range, making it adaptable to various power supply configurations from 2.7 V to 5.25 V.

● Low Power

Energy efficiency is a hallmark of the AD7927BRUZ-REEL7, consuming minimal power during operation.

● Power Consumption

At its maximum throughput rate of 200 kSPS, the ADC’s power consumption is impressively low:

1. 6 mW maximum with a 3 V supply
2. 5 mW maximum with a 5 V supply

● Multiple Inputs with Sequencer

The ADC offers eight single-ended inputs with a sequencer, allowing you to preprogram the selection of channels for sequential conversions.

● Wide Input Bandwidth

The built-in track-and-hold amplifier has a wide bandwidth and can handle input frequencies of up to 70 dB minimum SINAD at 50 kHz. This makes sure that accurate signal capture is done.

● Serial Clock Speed Management

The ADC provides flexibility in managing power and serial clock speed, allowing customization to suit specific application requirements.

● No Pipeline Delays

The AD7927BRUZ-REEL7 eliminates pipeline delays, ensuring responsive data acquisition and real-time results.

● High-Speed Serial Interface

It features a high-speed serial interface compatible with SPI, QSPI™, MICROWIRE™, and DSP, simplifying integration into a wide range of systems.

● Shutdown Mode

In shutdown mode, the ADC consumes a mere 0.5 μA, making it power-efficient even when not actively processing data.

● Compact Form Factor

The AD7927BRUZ-REEL7 is available in a 20-lead TSSOP package, making it compact and suitable for space-constrained applications.

● Qualified for Automotive Applications

This ADC is certified for use in automotive applications, ensuring dependability and robust performance in harsh conditions.

The AD7927BRUZ-REEL7’s exceptional mix of speed, power efficiency, and versatility makes it a good choice for a wide range of applications requiring precise analog-to-digital conversion, from industrial automation to automotive systems.

Operating Principles of the AD7927BRUZ-REEL7

The performance and functioning of the AD7927BRUZ-REEL7 are governed by numerous key concepts. In this section, we’ll look at the fundamental principles of operation of this versatile 12-bit analog-to-digital converter (ADC).

● Power Supply Requirements

A sufficient power supply is required for the AD7927BRUZ-REEL7 to function properly. It is intended to function within a voltage range of 2.7 V to 5.25 V. Because of its wide voltage tolerance, the ADC is compatible with a wide range of power supply designs. To maintain best performance, users should keep the applied voltage within this range.

● Throughput Rates

The quick throughput rate of the AD7927BRUZ-REEL7 is one of its distinguishing qualities. It has a throughput of 200 kSPS (kilo samples per second). This functionality enables the ADC to sample and convert analog signals quickly, making it suited for real-time data acquisition applications.

● Track-and-Hold Amplifier

The track-and-hold amplifier lies at the heart of the AD7927BRUZ-REEL7’s performance. This component is critical in accurately recording analog input signals prior to conversion. This amplifier, in particular, has a broad input bandwidth, allowing it to handle input frequencies in excess of 70 dB minimum SINAD at 50 kHz. The ADC’s wide bandwidth ensures that high-frequency signals are reliably captured, making it handy in a variety of signal processing applications.

● Control Signals

The AD7927BRUZ-REEL7 has an easy-to-use control interface via defined control signals. The conversion process and data gathering are governed by two basic control signals:

• Chip Select (CS): On the falling edge of CS, the input signal is sampled. At this moment, the conversion procedure is also started. This synchronous operation simplifies communication between the ADC and other devices like microprocessors or digital signal processors (DSPs).
• Serial Clock Signal (SCLK): SCLK fulfills two functions. It not only manages the conversion but also serves as the master clock. The frequency of the SCLK has a direct impact on the ADC’s conversion time. Users can adapt the ADC’s performance to match specific application requirements by altering the SCLK frequency. With a 20 MHz SCLK, the conversion time can be as short as 800 ns, illustrating the ADC’s versatility to diverse speed demands.

To summarize, the AD7927BRUZ-REEL7’s operational principles are based on its capacity to properly manage power supplies, produce high throughput rates, use a wide-bandwidth track-and-hold amplifier, and respond to control signals such as CS and SCLK. These principles, taken together, enable the ADC to provide precise and efficient analog-to-digital conversion for a wide range of applications.

AD7927BRUZ-REEL7 Key Highlights

Learn about the AD7927BRUZ-REEL7, a versatile analog-to-digital converter (ADC) developed for high-performance applications, and its important features:

• High Throughput, Low Power Consumption: Achieve up to 200 kSPS throughput rates while consuming only 3.6 mW at 3 V, making it perfect for real-time data capture and energy-efficient devices.
• The ADC has eight single-ended inputs and a channel sequencer, which simplifies the collecting of data from several sources sequentially.
• Operates from 2.7 V to 5.25 V with a VDRIVE function for flexible interfacing with 3 V or 5 V systems, facilitating integration.
• Flexible Clock Management: Control the serial clock speed to adjust conversion rates and optimize performance for individual applications. When not in use, power-saving shutdown modes require only 0.5 A.
• The AD7927BRUZ-REEL7 provides precise control of sampling moments without pipeline delays, guaranteeing accurate and timely data gathering.

In conclusion, the AD7927BRUZ-REEL7 excels in speed, power efficiency, input flexibility, and control precision, making it an excellent choice for a wide range of applications that require high-quality analog-to-digital conversion.

Conclusion

Finally, the AD7927BRUZ-REEL7 is a high-performance 12-bit ADC that smoothly combines speed, precision, and energy efficiency. Its versatility makes it a valuable asset in a wide range of sectors. Gaining a thorough understanding of its features, pin arrangement, and operational principles allows for seamless integration into your projects, whether they include industrial automation, medical devices, communications, consumer electronics, or automotive systems.

Look no further if you want to realize the full potential of the AD7927BRUZ-REEL7. This amazing product is available at a low cost from ICRFQ, a well-known electronic component wholesaler in China. Take advantage of this golden opportunity to improve your electronic endeavors by utilizing the exceptional characteristics of this diode. Don’t be afraid to let innovation and greatness guide you. Elevate your projects with the AD7927BRUZ-REEL7 now.

The Latest And Most Popular Parts That You May Also Like