AP3211KTR-G1 IC

Technical Specifications of AP3211KTR-G1

Datasheet	AP3211KTR-G1 datasheet
Category	Integrated Circuits (ICs)
Family	PMIC – Voltage Regulators – DC DC Switching Regulators
Manufacturer	Diodes Incorporated
Series	–
Packaging	Tape & Reel (TR)
Part Status	Active
Function	Step-Down
Output Configuration	Positive
Topology	Buck
Output Type	Adjustable
Number of Outputs	1
Voltage – Input (Min)	4.5V
Voltage – Input (Max)	18V
Voltage – Output (Min/Fixed)	0.81V
Voltage – Output (Max)	15V
Current – Output	1.5A
Frequency – Switching	1.4MHz
Synchronous Rectifier	No
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Supplier Device Package	SOT-23-6

AP3211KTR-G1 Introduction

The buck-switching regulator integrated circuit, the AP3211KTR-G1, was created to offer electronic circuits a very efficient voltage conversion solution. The AP3211KTR-G1 can be utilized in various applications, from portable devices to automotive systems, and has a positive adjustable output voltage of 0.81V and a maximum output current of 1.5A. Switching regulators are crucial parts of electronic circuits because they efficiently convert and regulate voltage, which makes them a necessary component of several electronic devices.

AP3211KTR-G1 Description

The AP3211 is a 1.5A current mode, fixed frequency, PWM buck (step-down) DC-DC converter with great efficiency and superior line and load regulation. The system incorporates a low-on-resistance N-channel power MOSFET switch. Fast transient responsiveness and cycle-by-cycle current limitation are provided by current mode control. The AP3211 is compatible with a common series of inductors made by a number of different manufacturers. The design of the switch-mode power supply is significantly made simpler by this capability. The SOT-23-6 package for the AP3211 is available.

AP3211KTR-G1 Features

• Range of Input Voltage: 4.5V to 18V.
• Adjustable output voltage ranges from 0.81V to 15V.
• Fixed Frequency of 1.4 MHz.
• Effectiveness: up to 92%.
• 5A of output current.
• Current Mode Management.
• Over Current Protection Built-In.
• Thermal shutdown function built-in.
• UVLO function built-in.
• Over-voltage protection built-in.
• Integrated Soft-Start.

AP3211KTR-G1 Technical specifications

A buck-switching regulator with a positive adjustable output voltage is the AP3211KTR-G1. It has a lead configuration of six pins and is contained in a SOT-23-6 package. The package has the following measurements: 2.9mm x 1.6mm x 1.0mm.

The AP3211KTR-G1 has a maximum output current of 1.5A and accepts input voltages between 2.7V and 5.5V. It provides up to 95% efficiency and a low dropout voltage of 300mV at 1A.

The IC also comes with a number of control and security functions. It offers a soft-start feature to lessen startup inrush current. It also has undervoltage lockout (UVLO), thermal shutdown, and overcurrent protection to ensure the system operates safely. The AP3211KTR-G1 also has an adjustable current limit function to prevent short circuits.

Thermal requirements, including maximum junction temperature and thermal resistance Pin functionality and setup, providing explanations of each pin’s function and suggested connections

The IC also comes with a number of control and security functions. It offers a soft-start feature to lessen startup inrush current. It also has undervoltage lockout (UVLO), thermal shutdown, and overcurrent protection to ensure the system operates safely. The AP3211KTR-G1 also has an adjustable current limit function to prevent short circuits.

Thermal requirements, including maximum junction temperature and thermal resistance Pin functionality and setup, providing explanations of each pin’s function and suggested connections

Additionally, it’s critical to comprehend the AP3211KTR-G1’s pin layout and operation. The part has six pins in a SOT-23-6 package, each serving a particular function and being advised for a certain connection. Designers may ensure they use the component correctly and maximise its performance by familiarizing themselves with the pin configuration and suggested connections.

Overall, the AP3211KTR-G1’s technical qualities make it a flexible and dependable part for power supply applications.

AP3211KTR-G1 Applications

A flexible regulator, the AP3211KTR-G1, can be employed in various applications. Examples of common applications include:

• Power supplies: The AP3211KTR-G1 can be used to create effective and small power supply for various electronic devices, including game consoles, set-top boxes, and routers.
• LED drivers: The AP3211KTR-G1 can be utilized as an LED driver to supply constant current for LED lighting applications.
• The AP3211KTR-G1 can be used in battery charger circuits to control the charging voltage and current for various battery chemistries.
• In some applications, switching regulators like the AP3211KTR-G1 have a number of advantages over linear regulators. Several of these benefits include:
• greater effectiveness High frequency switching regulators control the output voltage by turning on and off the input voltage. Comparing this switching action to linear regulators, which release surplus power as heat, the efficiency of this switching action is higher.
• Reduced power dissipation: As was previously said, switching regulators work more efficiently, which leads to reduced power dissipation and increased power density in the same device.
• Wide input voltage range: Switching regulators are perfect for battery-powered applications because they can control the output voltage even when the input voltage varies.
• The manufacturer’s datasheet contains sample circuit schematics that show how the AP3211KTR-G1 can be utilized in various applications. The recommended circuit layout is shown in these diagrams for various input and output voltage ranges and current ratings.

AP3211KTR-G1 Design considerations

There are a few crucial design factors to take into account while using the AP3211KTR-G1:

• choosing input and output capacitors: Input and output capacitors are necessary for the AP3211KTR-G1 to function properly. The output capacitor should be selected to meet the output voltage ripple requirement and transient response, whereas the input capacitor should be selected to meet the input voltage ripple requirement.
• choice of inductor To ensure optimal operation, the inductor must be a key component in the design of a switching regulator. The inductance value should meet the output voltage ripple requirement and maximum output current, while the saturation current should support the maximum output current.
• PCB layout: The switching regulator’s performance can be significantly impacted by the PCB layout. Separating high-current and low-current channels, adequate grounding, and reducing parasitic inductance and capacitance should all be considered.
• There are a number of trade-offs to take into account when selecting whether to employ a switching regulator like the AP3211KTR-G1 versus a linear regulator in a design:
• Efficiency: When the input-output voltage differential is significant, switching regulators are often more efficient than linear regulators.
• Noise: Because switching regulators switch the output voltage at high frequencies, they can produce more noise than linear regulators.
• Switching regulators are frequently more expensive than linear regulators in terms of cost, particularly for low-current applications.

Switching regulators are typically an excellent option for high-current or high-efficiency applications, whereas linear regulators are suitable for low-current or low-noise applications.

Conclusion

The AP3211KTR-G1 is a flexible and effective buck-switching regulator IC that may be used in a variety of electronic applications, to sum up. It is a well-liked option for power supply, LED drivers, and battery chargers due to its small SOT-23-6 packaging, excellent efficiency, and inbuilt protection features. Important factors to consider when designing with the AP3211KTR-G1 include choosing the optimal input and output capacitors, selecting the best inductor for the needed performance, and paying close attention to the PCB layout to reduce noise ensure proper thermal management.

Switching regulators, such as the AP3211KTR-G1, is superior to linear regulators in terms of efficiency and heat dissipation, making them the best choice for applications that call for low power consumption and extended battery life. The AP3211KTR-G1 is an all-around dependable and affordable option for various power supply applications.

Don’t put off taking advantage of the DSP25-12A’s benefits any longer. Contact ICRFQ today to find out more and make your order.

The Latest And Most Popular Parts That You May Also Like