AT93C46DN-SH-T IC

Technical Specifications of AT93C46DN-SH-T

Datasheet	AT93C46DN-SH-T datasheet
Category	Integrated Circuits (ICs)
Family	Memory
Manufacturer	Atmel
Series	–
Packaging	Cut Tape (CT)
Part Status	Active
Format – Memory	EEPROMs – Serial
Memory Type	EEPROM
Memory Size	1K (128 x 8 or 64 x 16)
Speed	250kHz, 1MHz, 2MHz
Interface	Microwire, 3-Wire Serial
Voltage – Supply	1.8 V ~ 5.5 V
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	8-SOIC (0.154″, 3.90mm Width)
Supplier Device Package	8-SOIC

AT93C46DN-SH-T Introduction

The AT93C46DN-SH-T is a flexible microwire serial EEPROM that can store data that doesn’t change when the power goes out. It can be used in a wide range of applications, such as consumer electronics, industrial systems, and automotive devices. This EEPROM can be set up in either a 128 x 8 or 64 x 16 format, so it can meet different memory needs. The AT93C46DN-SH-T can meet the strict requirements of many different industries. It also comes in different space-saving packaging choices, which makes it even better for different application scenarios. Let’s talk in more detail about the features and perks of this great microwire serial EEPROM.

Overview of AT93C46DN-SH-T

The AT93C46DN-SH-T is a flexible microwire serial EEPROM that can store data that doesn’t change when the power goes out. It can be used in a wide range of applications, such as consumer electronics, industrial systems, and automotive devices. This EEPROM can be set up in either a 128 x 8 or 64 x 16 format, so it can meet different memory needs. The AT93C46DN-SH-T can meet the strict requirements of many different industries. It also comes in different space-saving packaging choices, which makes it even better for different application scenarios. Let’s talk in more detail about the features and perks of this great microwire serial EEPROM.

AT93C46DN-SH-T Key Features

The AT93C46DN-SH-T has a few key features that make it work well and be useful in a variety of situations:

● Selectable Organisation

The EEPROM has an ORG pin that lets the memory be set up in different ways. It can be set up as either 128 x 8 or 64 x 16, giving creators the freedom to pick the layout that works best for their application.

● Low Power Consumption

The AT93C46DN-SH-T is made to use little power, which makes it a good choice for applications that run on batteries. Its good power control makes sure the battery lasts longer and uses the least amount of energy possible. This makes it a great choice for portable and energy-sensitive devices.

● Wide Range of Operating Power

This EEPROM can work with a wide range of voltages, so it can be used with many different systems and power levels. The wider range of voltages it can work with makes it more useful on different systems and easier to use in different electronic designs.

● Fast Write Cycle Time and Endurance

The AT93C46DN-SH-T has a fast write cycle time, which makes it easy to store and get data. This makes sure that read and write processes are quick and reliable, which helps the system as a whole run better. Also, the EEPROM is very durable and can handle a lot of write cycles. This makes sure that the data stays correct and lasts for a long time.

The AT93C46DN-SH-T is a strong and efficient way to store nonvolatile memory because it has selectable organisation, low power consumption, a wide working voltage range, a fast write cycle time, and high endurance. Because of these key features, it is a great choice for a wide range of uses that require flexibility, reliability, and efficient data handling.

Applications of AT93C46DN-SH-T

The AT93C46DN-SH-T is useful in a wide range of businesses and can be used for many different tasks. Some famous examples include:

● Consumer Electronics

The AT93C46DN-SH-T works well with consumer electronics like smart appliances, audio/video equipment, game consoles, and wearable devices. It lets these devices store setup settings, user preferences, and other important data, which makes sure they work well and give users a smooth experience.

● Industrial Automation

The AT93C46DN-SH-T is one of the most important parts of industrial automation. It can be used to store parameters, calibration data, and firmware changes in industrial control systems. Also, the EEPROM’s ability to store calibration data for sensors reliably makes it useful for exact measurements and control in industrial settings. It can also be used for data logging apps, which allow important operational data to be collected and stored.

● Automotive

The AT93C46DN-SH-T’s reliable nonvolatile memory storage is very useful for automotive uses. It can be built into electronic control units (ECUs), which are in charge of running different parts of a car. The EEPROM can hold important information like the settings for the car, diagnostic information, and firmware changes. It can also be used in instrument clusters to store important car information and user preferences in a safe way. In infotainment systems, the EEPROM allows audio settings, navigation data, and user profiles to be saved.

These are just a few of the many different ways that the AT93C46DN-SH-T can be used. It is a good choice for storing nonvolatile memory in a wide range of electrical systems because it is flexible, reliable, and works with many different industries.

Packaging Options

The AT93C46DN-SH-T comes in different packaging choices, each of which is made to meet the needs of a different application while saving space. Here is a rundown of the different ways to package:

● 8-Lead SOIC (Small Outline Integrated Circuit)

The AT93C46DN-SH-T comes in a small 8-Lead SOIC package. This package is good for situations where there isn’t much room, which makes it a good choice for small electronic devices.

● Thin Shrink Small Outline Package (8-Lead)

The 8-Lead TSSOP package is another choice. This package takes up less room than the SOIC package, which makes the design even better at using space. It is especially useful for apps that need to make things very small.

● Micro Lead Frame No-Lead Package (8-Lead UDFN)

The AT93C46DN-SH-T is also available in an 8-Lead UDFN package, which saves a lot of room. The UDFN package is small and doesn’t have any leads, which lets PCB layouts fit more components and use room more efficiently.

These choices for packaging have certain sizes and pin arrangements. Depending on the package, the sizes may be different, so it’s important to check the datasheet or packaging specs for exact information. All three packages have pin configurations that usually have eight pins. These pins are carefully organised to make sure they connect correctly and work with standard PCB layouts.

The AT93C46DN-SH-T is good for a wide range of applications where being small and making good use of space are important. It does this by having different packaging options and designs that take up less space. Whether it’s the 8-lead SOIC, 8-lead TSSOP, or 8-lead UDFN, these packaging choices give the AT93C46DN-SH-T a lot of flexibility and make it easy to use in many different electronic designs.

Conclusion

In the end, the AT93C46DN-SH-T Microwire Serial EEPROM is a flexible and effective way to store memory that doesn’t lose power. It can be set up in a way that fits your needs, uses little power, works with a wide range of voltages, and has a fast write cycle time. It makes sure that settings, calibration data, and other important information are stored safely in household electronics, industrial automation, and automotive systems.

The AT93C46DN-SH-T is an important part of reliable memory storage systems. You can learn more about it and buy it from ICRFQ, China’s largest distributor of electronic parts. Find out how this exceptional EEPROM can improve the stability and performance of your system.

The Latest And Most Popular Parts That You May Also Like