Part Number: CPC1035NTR

Manufacturer: IXYS Integrated Circuits Division

Description: SSR RELAY SPST-NO 100MA 0-350V

Shipped from: Shenzhen/HK Warehouse

Stock Available: Check with us

Technical Specifications of CPC1035NTR

Datasheet  CPC1035NTR datasheet
Category Relays
Family Solid State Relays
Manufacturer IXYS Integrated Circuits Division
Series CPC, OptoMOS?
Packaging Tape & Reel (TR)
Part Status Active
Circuit SPST-NO (1 Form A)
Output Type AC, DC
On-State Resistance (Max) 35 Ohm
Load Current 100mA
Voltage – Input 1.2VDC
Voltage – Load 0 ~ 350 V
Mounting Type Surface Mount
Termination Style Gull Wing
Package / Case 4-SOP (0.150″, 3.81mm)
Supplier Device Package 4-SOP
Relay Type Relay

CPC1035NTR Introduction

Are you looking for a dependable, effective electrical switch that saves space on your circuit board? IXYS has you covered with their CPC1035N small solid-state relay; there’s no need to look further. This switch has an input-to-output isolation rating of 1500Vrms and utilizes optically linked MOSFET technology. As a result, it is very dependable and needs little driving power. Additionally, because it does not generate EMI or RFI and comes in a tiny, 4-pin SOP package, this component is ideal for use in various applications, such as instrumentation, data gathering, and security systems. You can have confidence that the CPC1035N will keep your electronic equipment safe and secure because it has a flammability rating of UL 94 V-0 and comes packaged in a tape and reel format.

CPC1035NTR Description

The CPC1035N is a tiny, normally open, single-pole (1-Form-A), solid-state relay in a 4-pin SOP packaging. It uses optically linked MOSFET technology to give input to output isolation of 1500Vrms. Very efficient infrared LEDs regulate the optically coupled output and the proprietary OptoMOS architecture used in the photovoltaic die and MOSFET switches by IXYS Integrated Circuits Division. The CPC1035N, produced by IXYS Integrated Circuits Division, is one of the smallest relays in the world because of its cutting-edge double-molded vertical construction packaging. It offers at least 20% board space savings over the competitor’s larger 4-pin SOP relay.

CPC1035NTR Features

  • Isolation of 1500Vrms for Input and Output.
  • Tiny 4-Pin SOP Package
  • Low Power Needs for the Drive.
  • The high degree of dependability
  • No EMI/RFI Generation.
  • Halogen-Free.
  • Flammability Rating UL 94 V-0.
  • Tape & Reel Version Available.

CPC1035NTR Applications

  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Security
  • Industrial Controls

Manufacturing Information

● Moisture Sensitivity

Each and every semiconductor package that is enclosed in plastic is vulnerable to the infiltration of moisture. IXYS Integrated Circuits classifies the moisture sensitivity of the plastic-encased devices it manufactures according to the most recent edition of the joint industry standard IPC/JEDEC J-STD-020, which was in effect at the time that the products were being evaluated. these products are put through rigorous testing that simulates the most extreme conditions outlined in the standard.

If you do not comply with the cautions or limitations that the given specifications have created, it is possible that the product’s performance, its operable life, and/or its general dependability will suffer. There is an MSL rating for this product’s sensitivity to moisture, as indicated below. It is recommended that it be handled per the requirements of the most recent version of the joint industry standard IPC/JEDEC J-STD-033, published in 2003.

● Soldering Profile

The IPC/JEDEC J-STD-020 Classification Temperature (TC) is listed in the table below, along with the maximum dwell period during which the body temperature of these surface mount devices may be (TC – 5)°C or higher. During reflow soldering procedures, the Classification Temperature determines the Maximum Body Temperature (MBT) these devices are permitted to have.

● Board Wash

IXYS Integrated Circuits suggests utilizing no-clean flux formulations whenever possible. After the solder reflow process, board cleaning to decrease or remove flux residue is permitted so long as necessary safeguards are taken to protect the device from being damaged in the process. The use of a low-pressure wash and a follow-up bake cycle that is enough to remove any moisture that may have become trapped within the device due to the cleaning process is also included among these measures. However, this list is not exhaustive.

Given that the wash parameters used to clean the board can vary, it is up to the user to determine the bake temperature and time necessary to eradicate the moisture trapped inside the package. This is necessary to ensure that the board is dry (assembler). Cleaning or drying techniques that use ultrasonic energy can potentially cause damage to the device and should not be used. In addition, the apparatus must not come into contact with any solvents or halide flux.

CPC1035NTR Detailed features

Input/output voltage of 1500 rms Isolation: This electronic switch offers a high level of isolation, which ensures that electrical signals do not pass between the input and output pins, thereby preventing damage to attached components. This isolation also ensures that the switch operates correctly.

Little Surface Mount Package (SOP) with 4 Pins: The switch is contained within a small Surface Mount Package (SOP) with 4 pins, making it simple to incorporate into electronic devices but also helping conserve space on the circuit board.

Minimal Drive Power Needs Due to the fact that this switch operates with such a low amount of power, it is an excellent option for use in electronic equipment from an environmental and economic standpoint.

High Reliability: This electronic switch was developed to have a low failure rate and a long lifespan, ensuring its function will remain stable over time. Its reliability was achieved by careful design.

No Electromagnetic Interference (EMI) or Radio Frequency Interference (RFI) Generation: The switch does not produce electromagnetic interference (EMI) or radio frequency interference (RFI), both of which have the potential to disrupt the operation of other electronic devices or circuits.

Halogen-Free: This switch was manufactured without halogenated materials, which, when subjected to high heat, can generate toxic vapors. Halogenated materials can be hazardous to one’s health.

High Flammability Rating of UL 94 V-0: The switch has a high flammability rating of UL 94 V-0, which indicates that it is resistant to catching fire or spreading flames in the event of a fire. Specifically, this rating indicates that the switch is resistant to catching fire.

Available as a Tape and Reel Version, This electrical switch can be purchased in a package format consisting of a tape and reel, which allows for secure transit and simple mounting during production.


In summary, the CPC1035NTR by IXYS is a miniature solid-state relay perfect for various applications, including telecom, security, aerospace, and medical equipment. With its optically coupled MOSFET and 4-pin SOP package, this relay offers a high level of input-to-output isolation at 1500RMS. It is also highly reliable, halogen-free, and UL-rated. At ICRFQ, we are committed to providing high-quality components and exceptional customer service, ensuring that you can order and receive the CPC1035NTR quickly and safely.

4.8/5 - (397 votes)
Kevin Chen