DS26LV32ATMX/NOPB IC

Technical Specifications of DS26LV32ATMX/NOPB

Datasheet	DS26LV32ATMX/NOPB datasheet
Category	Integrated Circuits (ICs)
Family	Interface – Drivers, Receivers, Transceivers
Manufacturer	Texas Instruments
Series	–
Packaging	Tape & Reel (TR)
Part Status	Active
Type	Receiver
Protocol	RS422, RS485
Number of Drivers/Receivers	0/4
Duplex	–
Receiver Hysteresis	35mV
Data Rate	–
Voltage – Supply	3 V ~ 3.6 V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154″, 3.90mm Width)
Supplier Device Package	16-SOIC

Description

The DS26LV32A is a fast quad differential CMOS receiver that complies with ITU-T V.11 and TIA/EIA-422-B standards. With a typical low static ICC of 9 mA, the CMOS DS26LV32AT is perfect for battery-operated and power-conscious applications. The gadget can be active High or active Low thanks to the TRI-STATE enabling EN and EN*. The four receivers have a common set of enables. If the inputs are left open, the receiver output (RO) is assumed to be high. The receiver can detect signals as low as 200 mV throughout the common mode range of 10V. The receiver outputs (RO) are LVCMOS and TTL compatible.

DS26LV32ATMX/NOPB Features

A complementary metal-oxide-semiconductor (CMOS)-designed low power, low voltage differential line driver and receiver integrated circuit, the DS26LV32ATMX/NOPB, was created. It is the perfect option for applications that must be fast, reliable, and have low power consumption.

DS26LV32ATMX/NOPB has the following salient characteristics:

• Design for Low-Power CMOS: The operating power of the DS26LV32ATMX/NOPB is minimal, with a typical power consumption of 30mW. Because of this, it is a great option for low-power and battery-powered applications.
• Temperature range for usage in tough industrial and military environments: The DS26LV32ATMX/NOPB is designed to operate across a wide temperature range, from -40°C to +85°C.
• complies with ITU-T V.11 and TIA/EIA-422-B (RS-422). The TIA/EIA-422-B (RS-422) and ITU-T V.11 guidelines are met by the DS26LV32ATMX/NOPB, ensuring interoperability with other compliant devices.
• The DS26LV32ATMX/NOPB is compatible with contemporary low-voltage systems due to its 3.3V operating design.
• Common Mode Range of 7V at VID = 3V: The DS26LV32ATMX/NOPB is suitable for high-noise situations since it has a common mode range of 7V at a voltage level of 3V.
• A great option for applications involving high common mode voltage is the DS26LV32ATMX/NOPB, which likewise has a common mode range of 10V at a voltage level of 0.2V.
• The receiver output of the DS26LV32ATMX/NOPB is protected by a receiver OPEN input failsafe feature that makes sure it stays high even when the input is open.
• Guaranteed AC Parameter: DS26LV32ATMX/NOPB ensures dependable data transmission in high-speed applications with a maximum receiver skew of 4ns and a maximum transition time of 10ns.
• It is simple to upgrade existing systems because the DS26LV32ATMX/NOPB and the DS26C32AT are pin compatible.
• A toggle frequency of up to 32 MHz is supported by DS26LV32ATMX/NOPB, which makes it perfect for high-speed applications.
• DS26LV32ATMX/NOPB is appropriate for various applications because it is offered in both SOIC and CLGA packaging (available in both).
• The DS26LV32ATMX/NOPB is offered in a standard microcircuit drawing (SMD) 5962-98585, guaranteeing conformity with military and aerospace regulations.

Overall, the DS26LV32ATMX/NOPB differential line driver and receiver is a highly adaptable and dependable device with various features and advantages for various applications. Thanks to its low power consumption, high-speed operation, and strong ESD tolerance, it is perfect for usage in various industries, including industrial, military, and aerospace.

The device is a flexible and adaptable solution for updating outdated systems or incorporating them into new designs because it complies with the recommendations of TIA/EIA-422-B (RS-422) and ITU-T V.11. This ensures interoperability with other compatible devices.

For high-speed applications where reliable data transmission is crucial, the device’s assured AC specifications, including a maximum receiver skew of 4ns and a maximum transition time of 10ns, make it a great choice.

The receiver’s OPEN input failsafe function ensures the output is always high even when the input is open, increasing the system’s overall dependability.

Because of its compatibility with contemporary low-voltage systems, high common-mode range, and extended temperature range, the DS26LV32ATMX/NOPB is appropriate for use in tough industrial and military settings. It also enables dependable operation in areas with high noise levels.

The DS26LV32ATMX/NOPB differential line driver and receiver is an outstanding option for integrating into new designs or upgrading existing systems because it is a highly capable and dependable differential line driver and receiver that offers a variety of features and benefits for a wide range of applications.

DS26LV32ATMX/NOPB Specifications

Here are the DS26LV32ATMX/NOPB’s precise technical details:

• Power Use: The device is an energy-efficient choice for low-power applications with a typical power usage of just 30 mW.
• The gadget is made to operate at 3.3 volts, but it can also accept input voltages between 0 and 3.3 volts. Typically, the output voltage swing is 2.4V.
• Common-Mode Range: The high common-mode range of the DS26LV32ATMX/NOPB is 7V at VID=3V and 10V at VID=0.2V. This guarantees dependable performance in loud settings.
• Its maximum operating frequency is the device’s 32 MHz toggle frequency, which is well-suited for high-speed data transmission applications.
• The device complies with industry standards, including TIA/EIA-422-B (RS-422) and ITU-T V.11, ensuring compatibility with current systems. This device also adheres to the Standard Microcircuit Drawing (SMD) 5962-98585.
• ESD Tolerance: For the human body model (HBM), the device has a high level of ESD tolerance with a tolerance of over 6.5kV.
• There are two different packaging options for the DS26LV32ATMX/NOPB: SOIC and CLGA.
• Pin Compatibility: The device is DS26C32AT pin compatible, making it simple to integrate into current designs.

In conclusion, the DS26LV32ATMX/NOPB is a low-power CMOS differential line driver and receiver with a high common-mode range, high-speed operation, and compliance with industry standards. It is an adaptable and trustworthy option for a variety of industrial and military applications due to its high level of ESD resistance and interoperability with current networks.

Conclusion

As a differential line driver and receiver, the DS26LV32ATMX/NOPB is a powerful and adaptable device that offers a variety of capabilities and advantages for various applications. It’s a fantastic option for updating legacy systems or incorporating them into new designs thanks to its low power consumption, high common-mode range, and interoperability with current networks. The device provides dependable data transmission even in difficult settings thanks to conformity with industry standards, assured AC parameters, and ESD tolerance.

At ICRFQ, we recognize the importance of choosing the appropriate electrical components for your projects. We provide reasonably priced, high-quality electrical parts, such as the DS26LV32ATMX/NOPB, and professional assistance to help you locate the required parts. So, don’t be afraid to contact our team of professionals if you have any queries or worries concerning this equipment. We provide the assurance you require as you begin your project.

The Latest And Most Popular Parts That You May Also Like