FT230XS-R IC

Technical Specifications of FT230XS-R

Introduction

Fast and easy connections between electronic devices are crucial in today’s interconnected environment. The FT230X-SR is a fantastic USB2.0 Full Speed IC that acts as a bridge between USB and simple UART interfaces, making for a straightforward and effective method of data transport. This tutorial will help you get the most of your FT230X-SR by introducing you to its many useful features and functions.

● Understanding the FT230X-SR

The FT230X-SR is a USB-to-asynchronous serial converter on a single chip. What sets it apart is that the full USB protocol is handled locally on the chip, doing away with the requirement for USB-specific firmware. This makes it easy for anyone, regardless of prior knowledge with USB development, to incorporate the component into a system design. Here are the specs:

● Single Chip USB to UART

The FT230X-SR is a single-chip solution that smoothly bridges USB and UART interfaces. This eliminates the need for complicated external circuitry, simplifying your design and freeing up critical PCB space.

● Entire USB Protocol On-Chip

One of the FT230X-SR’s distinguishing qualities is its ability to handle the whole USB protocol natively on the device. This eliminates the need to build USB-specific software, making integration into your project simple and efficient.

● Integrated EEPROM

The FT230X-SR includes a fully integrated 2048-byte EEPROM for storing device descriptors and CBUS I/O configurations. This capability simplifies device customization and configuration, providing seamless system compatibility.

● Clock Generation and Glue-less Interface

The gadget has fully integrated clock generating, so no external crystal is required. Furthermore, it has an extra clock output selection that allows you to interact with external MCUs or FPGAs without the need for additional components. This streamlines the design while lowering component costs.

● Versatile Data Transfer

The FT230X-SR supports a wide variety of data transfer rates, from 300 baud to 3 Mbaud. This adaptability allows for a wide range of applications, from basic serial communication to high-speed data transfer.

● Efficient Data Buffering

The FT230X-SR provides high data throughput with a 512-byte receive buffer and a 512-byte transmit buffer that uses buffer smoothing technology, making it appropriate for demanding data transfer applications.

● Driver Support

In most cases, FTDI supplies royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers, removing the requirement for USB driver development. This feature makes software integration easier and provides compatibility with a variety of operating systems.

● Customizable I/O Pins

The device includes CBUS I/O pins that can be configured to meet your individual application requirements.

● LED Status Indicators

The FT230X-SR supports transmit and receive LED drive signals for data flow monitoring, simplifying debugging and providing visual feedback.

● UART Interface Flexibility

The UART interface’s support for 7 or 8 data bits, 1 or 2 stop bits, and numerous parity choices provides interoperability with diverse communication protocols.

● Bit Bang Interface

Synchronous and asynchronous bit bang interfaces, as well as RD# and WR# strobes, providing versatility for a wide range of applications, particularly in embedded systems.

● Battery Charger Detection

The Battery Charger Detection feature on mobile devices can detect the presence of a charger on the USB port. This allows for faster battery charging, which improves user convenience.

● Unique USB Serial Number

Each FT230X-SR is pre-programmed with a unique USB serial number, making it easier to identify and track in your system.

● Power Options

The device supports bus-powered, self-powered, and high-power bus-powered USB configurations, allowing it to be used in a variety of power settings.

● Voltage Level Compatibility

The FT230X-SR provides real 3.3V CMOS drive output and TTL input via an inbuilt +3.3V level converter. It can also operate with external pull-ups at 1.8V while being 5V tolerant.

● Customizable I/O Drive Strength

The device has customizable I/O pin output drive strength, allowing you to tailor it to the needs of your individual application.

● Integrated Power-On-Reset

An integrated power-on-reset circuit ensures reliable operation and startup in your system.

● UART Signal Inversion

The UART signal inversion option expands your communication setup’s flexibility and ensures interoperability with a wide range of devices.

● Internal LDO Regulators

Internal 3.3V/1.8V LDO regulators enable consistent and efficient voltage regulation, eliminating the need for additional components.

● Low Power Consumption

The FT230X-SR draws only 8mA (normal) while active use and 125uA (typical) when in USB suspend mode. This ensures energy efficiency and longer gadget operation.

● USB Compatibility

The FT230X-SR supports UHCI, OHCI, and EHCI host controllers, making it adaptable and compatible with a wide range of USB controller types.

● Extended Temperature Range

The FT230X-SR is designed to function in a variety of situations and can withstand temperatures ranging from -40°C to 85°C.

● Compact and RoHS Compliant

The FT230X-SR is available in Pb-free 16 Pin SSOP and QFN packaging and meets RoHS compliance criteria, contributing to environmentally friendly design methods.

Finally, the FT230X-SR has a broad set of hardware features, making it a potent tool for seamlessly linking USB and UART interfaces. This device gives you a world of possibilities for efficient data transfer and communication in your projects, whether you’re working on embedded systems, IoT devices, data recording, or industrial automation.

Applications

The FT230X-SR finds its utility in a myriad of applications, including but not limited to:

• Embedded Systems:Ideal for connecting microcontrollers, FPGAs, and other embedded systems to a USB interface.
• IoT Devices:Facilitates communication between Internet of Things (IoT) devices and computers.
• Data Logging:Used in data logging applications, ensuring a smooth flow of data from sensors to storage.
• Industrial Automation:In industrial settings, the FT230X-SR can connect various machinery and controllers to a central system.
• Mobile Devices:The battery charger detection feature is advantageous for mobile devices, allowing for efficient charging.
• Educational Projects:Useful in educational settings to teach students about USB communication and interfacing.

Conclusion

The FT230X-SR is a high-quality USB to UART bridge solution that can be used in a variety of situations and makes using USB in your designs much easier. Engineers, developers, and hobbyists alike will find its extensive feature set and user-friendliness to be invaluable. The FT230X-SR paves the way for limitless possibilities in terms of data transfer and communication, whether you’re working on Internet of Things devices, embedded systems, or educational exploration projects.

For further information and to place an order, please contact ICRFQ, a pioneer in China’s electrical component business. Put your thoughts into action with me. If you’re ready to take your electronics design to the next level, contact us right away.

The Latest And Most Popular Parts That You May Also Like