FTLF1217P2BTL-B6 Transmitters

FTLF1217P2BTL-B6 Description

The best reference for learning about Finisar’s incredibly adaptable FTLF1217P2xTL Small Form Factor Pluggable (SFP) transceivers is “The Complete Guide to FTLF1217P2BTL-B6.” These transceivers were created to satisfy the requirements of numerous industry standards, including 100Base-FX, FDDI, ESCON, and Multimode SONET OC-3 SR-0 and OC-1 SR-0. They are lead-free and comply with RoHS Directive 2002/95/EC. Users have real-time access to the device’s working characteristics and can be informed of any irregularities thanks to their integrated digital diagnostic functions. These transceivers are an effective tool for network managers and engineers because the 2-wire serial communication protocol makes it simple to acquire identifying data and diagnostic monitoring. The indispensable resource, “The Complete Guide to FTLF1217P2BTL-B6”, is a must-have if you want to learn more about SFP transceivers.

Small Form Factor Pluggable (SFP) transceivers manufactured by Finisar comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. These transceivers are known as FTLF1217P2xTL. They are simultaneously compatible with the 100Base-FX, FDDI, ESCON, and Multimode SONET OC-3 SR-0 and OC-1 SR-0 protocols, as specified in IEEE Std 802.32, ISO/IEC 9314-33, Enterprise Systems Architecture/3904, and ANSI T1.416.01-19995, respectively. According to Directive 2002/95/EC4 and Finisar Application Note AN-2038, they comply with the RoHS standard and do not contain any lead. Digital diagnostics functions can be accessed using the 2-wire serial bus specified in the SFP MSA.

FTLF1217P2BTL-B6 Features

The FTLF1217P2BTL-B6 is a state-of-the-art SFP transceiver module developed specifically to fulfil the requirements of high-speed data transmission networks. This module is a dependable and effective solution for data transfer because it can enable bi-directional data lines at speeds as high as 200 Mb/s.

The fact that the FTLF1217P2BTL-B6 has a hot-pluggable SFP footprint makes it possible for installation and maintenance to be performed with relative ease. The module also has built-in digital diagnostic functions, ensuring that the module’s performance can be monitored and troubleshoot without disruptions.

The metal enclosure helps decrease EMI interference, while the LED-based transmitter with a wavelength of 1310nm and the duplex LC connector ensures that the data transfer is both constant and stable. The fact that the module just requires a single 3.3V power source to function and has a low power consumption makes it an efficient and cost-effective choice for data transport.

The fact that the FTLF1217P2BTL-B6 does not contain lead and is in compliance with RoHS ensures that it satisfies the strictest environmental regulations. The module has an industrial operating temperature range of -40 degrees Celsius to 85 degrees Celsius, enabling it to function in a diverse array of environments and making it suitable for use in various commercial and industrial situations.

In general, the FTLF1217P2BTL-B6 is a flexible SFP transceiver module that offers a high level of performance. It was developed to fulfil the requirements of contemporary data communication networks.

Regulatory Compliance

Finisar transceivers comply with US FDA requirements and are classified as Class 1 eye safety goods. These goods have met the ocular safety standards of EN (IEC) 60825 and the electrical safety requirements of EN (IEC) 60950, earning them a certification from TÜV and CSA, respectively. If you would like a copy of your certificate, you can get one by contacting Finisar Corporation. If you would like a copy of the referenced certifications, you can get one by contacting Finisar Corporation.

Digital Diagnostic Functions

Finisar FTLF1217P2xTL SFP transceivers support the 2-wire serial communication protocol. This protocol is defined in the SFP MSA1 specification. It shares the same electrical requirements as the E2 PROM specified in the GBIC standard, with which it is extremely closely associated. The standard SFP serial ID provides access to identification information that identifies the transceiver’s capabilities, standard interfaces, manufacturer, and other information. In addition, Finisar SFP transceivers come equipped with a one-of-a-kind enhanced digital diagnostic monitoring interface. This interface grants users access in real-time to device operating parameters such as temperature, bias current, transmitted optical power, received optical power, and transceiver supply voltage.

Additionally, it outlines a sophisticated system of alarm and warning flags that warns end-users when operating parameters are outside of a factory-set normal range. This system alerts end-users when certain operating parameters are outside of a factory-set normal range. A 256-byte memory map is defined in the SFP MSA and stored in the E2 PROM. This memory map can be accessed through a 2-wire serial interface at the 8-bit address 1010000X. (A0h). Because the digital diagnostic monitoring interface uses the 8-bit address 1010001X (A2h), the serial ID memory map that was initially defined does not change. Since the interface is completely identical to the GBIC Specification and the SFP Multi-Source Agreement, it is backwards compatible with both of those standards. “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers” is the title of the Finisar Application Note AN2030, which provides a comprehensive description of the interface.

Within the transceiver is a component known as a Digital Diagnostics Transceiver Controller (DDTC), which may be accessed via a 2-wire serial interface. This component is responsible for monitoring and reporting operational and diagnostics information. The host is the one that produces the serial clock signal (also known as SCL, Mod Def 1) once the serial protocol is made active. The data is clocked into the SFP transceiver by the positive edge, and it is stored in the portions of the E2 PROM that are not protected from being written to. The negative edge clocks the data coming from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. To indicate the beginning and conclusion of the serial protocol activation process, the host uses SDA in conjunction with SCL. The memories are laid up as a string of 8-bit data words that can be addressed singly or in a certain order.

Mechanical Specifications

The dimensions of the Small Form Factor Pluggable (SFP) transceivers manufactured by Finisar are compliant with those stipulated by the SFP Multi-Sourcing Agreement (MSA).

Conclusion

Finisar’s FTLF1217P2xTL (SFP) Small Form Factor Pluggable transceivers are a highly versatile and reliable solution for various industry standards, including 100Base-FX, ESCON, FDDI, and Multimode SONET OC-3 SR-0 and OC-1 SR-0. In conclusion, these transceivers are available in a pluggable form factor. These transceivers are lead-free and RoHS-compliant and have a working temperature range of -40 degrees Celsius to 85 degrees Celsius. These transceivers offer real-time access to the device characteristics and identifying information thanks to their built-in digital diagnostic features and 2-wire serial communication protocol.

Because it offers a full overview of these modern SFP transceivers, this article is a valuable resource for everyone interested in the technology, including network managers, engineers, and anyone curious about it. For more information or to order FTLF1217P2xTL, contact ICRFQ, your leading electronic component distributor in China. We will ensure that you receive the best product at an affordable price.

The Latest And Most Popular Parts That You May Also Like