HT9170D-18SOP Receiver

HT9170D-18SOP Introduction

The HT9170D is a DTMF (Dual Tone Multi-Frequency) receiver, which means it can pick up and understand DTMF signs. DTMF symbols are used in many types of communication systems, like phones, remote controls, and security systems. The gadget detects and decodes the 16 types of DTMF input signals into a 4-bit code by using digital counting. To split tone signals into high-frequency and low-frequency signals, very accurate filter circuits are used. The HT9170D can also go into power-down mode, which is a low-power state that makes it great for apps that run on batteries.

HT9170D-18SOP Functionality

Digital counting is used by the HT9170D to find and decode DTMF input signals. DTMF signals are made up of two different frequencies, one high and one low. They are made by hitting buttons on a keypad or something similar. When DTMF signals come in, the HT9170D uses a filter circuit to split the high-frequency signals from the low-frequency signals. The device then sends out a 4-bit code that matches the signal that came in.

The HT9170D’s filter circuit is made up of a band-split filter, which splits the tone signals going in into high-frequency and low-frequency parts. Then, the high-frequency part goes through a low-pass filter, and the low-frequency part goes through a high-pass filter. This filtering process makes sure that only the frequency components that are needed are processed and that any noise or interference is filtered out.

After filtering, the HT9170D sends out a 4-bit binary code that matches the DTMF signal that was sent in. The output is locked and held until a new input signal comes in. This keeps the output stable and accurate until a new signal comes in. The gadget can also find and ignore bad signals or noise, which makes the DTMF decoding process more reliable and accurate as a whole.

Overall, the HT9170D’s advanced filtering and digital counting methods make it very accurate and reliable at decoding DTMF signals. The device is used a lot in phone systems, remote controls, and security systems, among other things.

HT9170D-18SOP Power-down state

Power-down mode is a low-power mode that the HT9170D can go into to save energy when it doesn’t need much power. When the gadget is turned off, it uses very little power, which makes it perfect for applications that run on batteries.

For the HT9170D to go into power-down mode, the EN pin must be kept low for a certain amount of time. Once the device is in power-down mode, it stops doing anything on the inside and goes into a state where it uses less power. By setting the EN pin high again, the HT9170D can be taken out of power-down mode.

The power-down mode is useful for devices that run on batteries or other situations where saving power is important. By turning off the device when it’s not being used, the device can save energy and make the battery last longer. Also, the device can be set to go into power-down mode automatically after a certain amount of inaction, which saves even more power.

Overall, the HT9170D’s power-down mode is a simple and effective way to lower the amount of power used in low-power applications. By saving energy, the gadget can make the battery last longer and make the whole system work better.

HT9170D-18SOP Applications

• The HT9170D is often used in things like telephone answering machines, remote control systems, and security systems that need to decode DTMF signals. One of the best things about the HT9170D is that it has very precise filter circuits that can separate tone signals into high frequency and low frequency signals. This makes it possible to identify and decode DTMF signals correctly, which is very important in these applications.
• The HT9170D is used in telephone answering machines to find and process the DTMF signals made by the user’s keypad. This means that DTMF signals can be used to handle things like playing back a message, forwarding a call, and deleting a message. The HT9170D is also used in remote control systems. It can be used to decode the DTMF signals sent by a remote control, which lets you manage things like TVs, air conditioners, and other appliances.
• The HT9170D can also be used to identify and decode DTMF signals made by a user’s key press on a security panel. This is done in security systems. This means that DTMF signals can be used to arm or disarm the system or control other features.

Overall, the HT9170D is a good choice for applications that need to identify and decode DTMF signals. This is because its filter circuits are very accurate and its decoding capabilities are reliable. It is a popular choice for many applications that need DTMF decoding because it is small, uses little power, and is easy to add to current systems.

Summery

In short, the HT9170D is a DTMF (Dual Tone Multi Frequency) receiver with a digital encoder and a band-split filter. Its major job is to use digital counting techniques to find and decode DTMF input signals into a 4-bit code output. The device has very accurate filter circuits that split tone signals into high frequency and low frequency signals. This lets DTMF signals be accurately decoded. One of the best things about the HT9170D is that it has a power-down mode that lets it run on less power. This makes it a great choice for low-power uses. By sending a signal to the STQ pin, the gadget can be taken out of power-down mode.

The HT9170D is often used in things like telephone answering machines, remote control systems, and security systems that need to identify and decode DTMF signals. It is a common choice for these applications because it has very accurate filter circuits, is small, uses little power, and is easy to put together. But the HT9170D has a limitation in that it can only pick up and interpret DTMF signals. It can’t do this for other tones or signals. Noise or other sounds that interfere with it may also make it less accurate. If you want to learn more about the HT9170D, you can look at the manufacturer’s datasheet, application notes, and other technical materials.

They can also look at other DTMF receivers and compare the HT9170D to their features and how well they work.

Conclusion

Overall, the HT9170D is a stable and accurate device that is used in a wide range of DTMF decoding applications. It is a useful tool for designers and engineers working on projects that need to identify and decode DTMF signals because it has a lot of features and is easy to use. add a second line.

Want to know more about HT9170D or place an order? Contact ICRFQ, the best distributor of electrical parts in China. We promise to give you the best product at a price you can pay. Don’t be afraid to get in touch with us right now!

The Latest And Most Popular Parts That You May Also Like