MIC2017YM6-TR IC

Technical Specifications of MIC2017YM6-TR

Datasheet	MIC2017YM6-TR datasheet
Category	Integrated Circuits (ICs)
Family	PMIC – Power Distribution Switches, Load Drivers
Manufacturer	Microchip Technology
Series	–
Packaging	Tape & Reel (TR)
Part Status	Active
Switch Type	General Purpose
Number of Outputs	1
Ratio – Input:Output	1:1
Output Configuration	High Side
Output Type	P-Channel
Interface	On/Off
Voltage – Load	2.5 V ~ 5.5 V
Voltage – Supply (Vcc/Vdd)	Not Required
Current – Output (Max)	2A
Rds On (Typ)	70 mOhm
Input Type	Non-Inverting
Features	Load Discharge, Slew Rate Controlled
Fault Protection	Current Limiting (Adjustable), Over Temperature
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	SOT-23-6
Supplier Device Package	SOT-23-6

Introduction

The MIC2017YM6-TR is an outstanding member of the MIC20XX family of high-side power switches, developed for a wide range of applications in printers,  digital televisions (DTV), set-top boxes (STB), PDAs, PCs,and peripheral devices. This detailed guide will walk you through the MIC2017YM6-TR’s essential features, functioning, and applications, shedding light on its capabilities and benefits.

Understanding the MIC20XX Family

The MIC20XX switch family is well-known for its current limiting and power distribution capabilities. These switches are critical in safeguarding devices and loads against high currents and fault events. The following are some of the family’s distinguishing characteristics:

Features of the MIC20XX Family

The MIC20XX power switch family is a versatile and feature-rich solution designed to provide precise and dependable power distribution control in a wide range of electronic equipment. In this section, we look at the outstanding array of capabilities provided by this family, including the notable MIC20X3 – MIC20X9, which make them an indispensable choice for current applications.

● MIC20X3 – MIC20X9

The MIC20XX family has several members, ranging from the MIC20X3 to the MIC20X9, allowing you to select the specific switch that best meets the needs of your application.

● Low On-Resistance

With an on-resistance of just 170m at 5V, these switches minimize power loss, ensuring efficient power supply and lower heat generation.\

● Active High or Active Low Enable

You can choose between active high and active low enable setups, depending on your system’s control logic.

● Wide Operating Range

The switches perform flawlessly throughout a 2.5V to 5.5V input voltage range, making them compatible with a wide range of power sources and applications.

● Pre-set Current Limits

The family has pre-set current limit values of 0.5A, 0.8A, and 1.2A, making power control easier in a variety of settings.

● Adjustable Current Limits

The MIC20X7 to MIC20X9 variants allow you to modify the current limit from 0.2A to 2.0A* for increased adaptability. The MIC20X9A goes a step further, with a current range of 0.1A to 0.9A*.

● Undervoltage Lock-Out (UVLO)

UVLO ensures the device’s safety by forbidding operation outside of the defined voltage thresholds.

● Variable UVLO Thresholds

Customize the UVLO thresholds to meet the exact needs of your application, providing you precise control.

● Automatic Load Discharge

This feature is especially useful for capacitive loads because it automatically discharges them to prevent large inrush currents, resulting in a smooth and safe power-up procedure.

● Soft-Start

Many applications require the prevention of large current inrush. The soft-start feature ensures a regulated power-up sequence, which reduces component stress.

● Adjustable Slew Rate

Customize the slew rate to meet the needs of your application, giving you more control over power delivery dynamics.

● Automatic-On Output After Fault

In order to improve dependability, the devices immediately restore output after a fault condition is remedied, ensuring continuous functioning.

● Thermal Protection

Thermal protection is built into the switches, which protects the device and load by prompting a shutdown in the event of dangerous temperature levels.

● UL Recognition

The MIC20XX series is UL certified, ensuring that it meets stringent safety and quality criteria.

In conclusion, the MIC20XX power switch family is a feature-rich solution that enables engineers and designers to create cutting-edge devices with accurate and reliable power control. With a variety of capabilities, variable settings, and a reputation for safety, these switches are well-suited for a variety of electrical applications.

MIC2017YM6-TR Specifications: Unleash the Power

Specifications are important when it comes to selecting the proper electronic component for your project. The MIC2017YM6-TR is a versatile high-side power switch with remarkable features that may be used in a variety of applications. Let’s have a look at the important features that make the MIC2017YM6-TR such a strong contender:

● On-Resistance

The MIC2017YM6-TR has a typical on-resistance of 170m at 5V. Because of the low on-resistance, there is little power loss during the switching operation. It guarantees that your electronic equipment run efficiently, maximizing power consumption.

● Operating Voltage

Input voltages for the MIC2017YM6-TR range from 2.5V to 5.5V. Because of its wide operating voltage range, it is compatible with a wide range of power sources, making it adaptable to a wide range of projects and applications.

● Adjustable Current Limit

The adjustable current limit is one of the MIC2017YM6-TR’s noteworthy features. It has an adjustable current range of 0.2A to 2.0A. This adaptability means that the device can meet the unique current requirements of your application, delivering personalized performance.

● Undervoltage Lock-Out (UVLO)

Undervoltage Lock-Out (UVLO) with customizable thresholds is built into the MIC2017YM6-TR. This feature allows you to tailor the UVLO parameters to your project’s needs, increasing its versatility.

● Load Discharge and Soft-Start

The MIC2017YM6-TR is equipped with automatic load discharge for capacitive loads and soft-start capabilities for applications requiring controlled power-up and protection against high current inrush. This ensures a controlled and smooth power-up process.

● Thermal Protection and UL Recognition

The MIC2017YM6-TR does not disappoint when it comes to safety in electronic systems. It, like its MIC20XX family competitors, provides thermal protection to prevent overheating. Furthermore, it is UL certified, ensuring greater safety and compliance for your projects.

In conclusion, the MIC2017YM6-TR is a high-side power switch that offers performance, adaptability, and safety. Its exceptional specifications, which include a low on-resistance, a wide working voltage range, an adjustable current limit, UVLO, load discharge, and soft-start, making it a good choice for a wide range of applications. It provides peace of mind when it comes to the safety and reliability of your electronic equipment, thanks to thermal protection and UL recognition. The MIC2017YM6-TR provides the power and versatility to satisfy your demands whether you’re working on consumer electronics, industrial control, automotive applications, or something else.

Applications

The versatility of the MIC2017YM6-TR makes it an ideal choice for various applications, including but not limited to:

1. Printers: Managing power distribution for efficient printing operations.
2. Set-Top Boxes (STB): Protecting devices in STBs from current surges and faults.
3. Personal Computers (PCs): Enhancing power control in desktop and laptop computers.
4. Personal Digital Assistants (PDAs): Safeguarding power delivery in handheld devices.
5. Peripheral Devices: Managing power for a wide range of peripheral devices.

Conclusion

In conclusion, the MIC2017YM6-TR from the MIC20XX family is a remarkable high-side power switch that offers cutting-edge features like current limiting, thermal protection, and the unique Kickstart™ feature. Its versatility makes it suitable for a wide range of applications, from consumer electronics to industrial control systems. When sourcing this component, ICRFQ, a reputable Chinese electronic component wholesaler, stands out as the trusted supplier of choice, ensuring high-quality components at competitive prices. Embark on your innovative journey with the MIC2017YM6-TR and ICRFQ to empower your electronic systems with reliability and efficiency.

The Latest And Most Popular Parts That You May Also Like