Part Number: NC7WZ241K8X

Manufacturer: onsemi

Description: IC BUFFER NON-INVERT 5.5V US8

Shipped from: Shenzhen/HK Warehouse

Stock Available: Check with us

Technical Specifications of NC7WZ241K8X

Datasheet  NC7WZ241K8X datasheet
Category Integrated Circuits (ICs)
Family Logic – Buffers, Drivers, Receivers, Transceivers
Manufacturer Fairchild Semiconductor
Series 7WZ
Packaging Tape & Reel (TR)
Part Status Active
Logic Type Buffer, Non-Inverting
Number of Elements 2
Number of Bits per Element 1
Input Type
Output Type Push-Pull
Current – Output High, Low 32mA, 32mA
Voltage – Supply 1.65 V ~ 5.5 V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 8-VFSOP (0.091″, 2.30mm Width)
Supplier Device Package US8

NC7WZ125K8X Introduction

The NC7WZ241K8X buffer is a flexible electrical part that is utilized in many different applications. It functions as an essential link between various components of an electrical circuit, ensuring efficient and trustworthy signal transmission. This buffer’s non-inverting functionality and 3-STATE outputs are intended to effectively amplify and isolate signals. It provides an effective method for preserving signal integrity and raising overall circuit performance.

The NC7WZ241K8X buffer, produced by the famous manufacturer Onsemi, is a solid option for electronic designs thanks to a number of important qualities. Its construction makes use of cutting-edge CMOS technology, resulting in exceptional switching performance with a high output drive and little static power dissipation. The device is flexible in diverse voltage situations because it runs over a broad VCC working range of 1.65 volts to 5.5 volts.Its outputs and inputs both have high impedance when VCC is zero volts, ensuring effective signal handling. The NC7WZ241K8X buffer is a dependable and flexible component for electronic circuits thanks to these characteristics and the manufacturer’s experience.

NC7WZ125K8X Features Description

A flexible electronic component called the NC7WZ241K8X is intended to improve signal processing in a variety of applications. It has a number of features that help it perform with dependability. The device’s 3-STATE outputs each have independent active LOW enables, allowing for flexible signal transmission management.

The NC7WZ241K8X is made with cutting-edge CMOS technology and offers ultra-high switching performance with little power consumption. It is the perfect option for applications needing quick and dependable signal buffering because of its speed and efficiency.

The NC7WZ241K8X provides versatility in various voltage settings by operating in the 1.65V to 5.5V VCC voltage range. Without sacrificing performance, it can easily integrate into a variety of electronic systems.

Low signal interference and effective signal handling are guaranteed by the NC7WZ241K8X’s high impedance inputs and outputs when VCC is at 0V. In addition, regardless of the VCC operating range, the device’s inputs can withstand voltages up to 5.5 volts, offering strong protection against voltage fluctuations and guaranteeing stable operation.

The NC7WZ241K8X buffer is a versatile part that satisfies the needs of contemporary electrical systems thanks to its independent active LOW enables, ultra-high-speed performance, sophisticated CMOS technology, large voltage range, and voltage tolerance capabilities.

NC7WZ125K8X Electrical Characteristics

The NC7WZ241K8X buffer demonstrates a number of significant electrical characteristics that support its dependable performance. These are the main requirements:

The device can withstand input voltages of up to 5.5 volts, providing reliable protection against voltage variations and enabling compatibility with a variety of input signals.

  • Drive Capability: The NC7WZ241K8X has a high drive capability, allowing it to drive capacitive loads effectively and maintain signal integrity even in sophisticated electronic systems.
  • Power Dissipation: The buffer is made to have low static power dissipation, which maximizes energy efficiency and reduces heat production. In power-sensitive applications where energy conservation is crucial, this characteristic is crucial.

The NC7WZ241K8X buffer’s electrical properties contribute to its overall performance by enabling dependable signal buffering, compatibility with a range of input signals, and effective power management. The gadget offers designers a flexible solution for signal processing in a variety of applications by satisfying these requirements.

Operating Conditions

It’s critical to follow the operating guidelines for the NC7WZ241K8X buffer in order to guarantee top performance and dependability. The important factors are as follows:

The VCC voltage The buffer is intended to function between 1.65 volts and 5.5 volts in terms of voltage. To guarantee good operation, the device must be supplied with a stable and suitable VCC voltage that falls within this given range.

Temperature Range: The NC7WZ241K8X buffer is designed to function between a normal temperature range of -40°C and 85°C. To ensure dependable performance and avoid any potential problems brought on by excessive temperatures, it is crucial to run the device within this temperature range.

Levels of Signal Input Voltage Regardless of the VCC working range, the buffer’s inputs are made to handle voltage levels as high as 5.5 volts.This enables flexibility in the buffer’s interface with multiple signal sources, enabling interoperability and straightforward integration in a variety of electronic systems.

Design professionals can maximize the performance and dependability of the NC7WZ241K8X buffer by following these operating conditions. The best performance of the device in a variety of application settings depends on carefully choosing the optimum VCC voltage, operating within the designated temperature range, and making sure signal input voltage levels are within the allowed range.

NC7WZ125K8X Application Examples

A flexible electrical component, the NC7WZ241K8X buffer, is used in a variety of settings and industries. Here are some real-world instances of its application:

● Signal Buffering

The NC7WZ241K8X excels in applications requiring signal buffering because it protects signal integrity by separating the input and output and offering a clear, amplified output signal. When signals need to be boosted and sent over great distances without degrading, they can be employed in data communication systems.

● Level Shifting

The buffer is excellent for level-shifting applications since it can handle various voltage levels. It has the ability to interface between logic families that run at various voltage levels, ensuring smooth communication between gadgets with disparate voltage requirements. This allows for seamless interoperability and integration with mixed-signal systems.

● Interfacing

The NC7WZ241K8X is a good choice for integrating different logic families, including TTL and CMOS. It enables seamless connection and integration inside electronic systems by facilitating easy data transmission and compatibility between various device types.

● Telecommunications

The NC7WZ241K8X can be utilized in telecommunications applications such as level translators, line drivers, and signal amplification. It guarantees effective and dependable data transfer between various communication system components.

● Automotive

The buffer is appropriate for automotive applications because of its reliable performance and tolerance to a wide variety of operating conditions. It offers dependable signal buffering and level shifting capabilities and can be used in sensor interfaces, infotainment systems, and vehicle control modules.

● Consumer Electronics

Widespread use of the NC7WZ241K8X can be found in consumer electronics. It is used in audio/video equipment, gaming consoles, smartphones, tablets, and other devices to enable signal buffering and level shifting for better compatibility and performance.

● Internet of Things (IoT)

The NC7WZ241K8X is essential for integrating and connecting numerous IoT devices as the IoT ecosystem grows. It allows seamless data transfer and integration by ensuring communication between sensors, microcontrollers, and communication modules.

These examples demonstrate the NC7WZ241K8X buffer’s adaptability in a variety of fields, including telecommunications, automotive, consumer electronics, and the internet of things (IoT). It is a useful component in a variety of electronic systems and applications because of its signal buffering, level shifting, and interface capabilities. Top of Form


The NC7WZ241K8X buffer is a highly versatile and reliable electronic component that delivers exceptional performance across a range of applications. In summary, it is an excellent choice for electronic projects. The component’s capacity to manage signal buffering, level shifting, and interfacing requirements renders it a valuable asset in various industries.

The NC7WZ241K8X is a versatile component that can be used in various applications, such as telecommunications systems, automotive modules, consumer electronics, and IoT devices. It offers the required functionality for these applications. For convenient sourcing of this component, please contact ICRFQ. Utilize the NC7WZ241K8X to maximize the potential of your electronic designs and attain superior performance.

4.8/5 - (397 votes)
Kevin Chen