NRF52832-QFAA-R
Part Number: NRF52832-QFAA-R
Manufacturer: Nordic Semiconductor ASA
Description: IC RF TXRX+MCU BLUETOOTH 48VFQFN
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
ICRFQ.com - Electronic Components Distributor in China Since 2003
Part Number: NRF52832-QFAA-R
Manufacturer: Nordic Semiconductor ASA
Description: IC RF TXRX+MCU BLUETOOTH 48VFQFN
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
Datasheet | NRF52832-QFAA-R datasheet |
---|---|
Category | RF/IF and RFID |
Family | RF Transceiver ICs |
Manufacturer | Nordic Semiconductor ASA |
Series | – |
Packaging | Tape & Reel (TR) |
Part Status | Active |
Type | TxRx + MCU |
RF Family/Standard | Bluetooth, General ISM > 1GHz |
Protocol | Bluetooth v4.1 |
Modulation | GFSK |
Frequency | 2.4GHz |
Data Rate (Max) | 2Mbps |
Power – Output | 4dBm |
Sensitivity | -96dBm |
Memory Size | 512kB Flash, 64kB RAM |
Serial Interfaces | I2C, SPI, UART |
GPIO | 32 |
Voltage – Supply | 1.7 V ~ 3.6 V |
Current – Receiving | 5.5mA ~ 10.4mA |
Current – Transmitting | 5.5mA ~ 15.2mA |
Operating Temperature | -40°C ~ 85°C |
Package / Case | 48-VFQFN Exposed Pad |
The NRF52832-QFAA-R is a powerful and flexible system-on-chip (SoC) that blends an IC RF TxRx and an MCU Bluetooth into one device. This small but powerful chip works in the General ISM > 1 GHz frequency range and supports Bluetooth v5.3 in the 2.4 GHz band, which makes it a popular choice for a wide range of uses in the electronics industry.
As a single-chip solution, the NRF52832-QFAA-R is cheap and saves space in devices. This makes it a popular choice among designers who want to make designs that are both efficient and small. It is perfect for wearables, smart home devices, and wireless monitors because it uses little power and has advanced features.
In this piece, we’ll tell you everything you need to know about the NRF52832-QFAA-R, including its technical specs, pin configuration, features, applications, programming and development, limitations, and resources. We’ll talk about how this SoC is leading to new ideas and changing the electronics business.
The NRF52832-QFAA-R is a powerful and feature-packed SoC that blends an IC RF TxRx and an MCU Bluetooth into a single device. Here are some of its most important technology specs:
Overall, the NRF52832-QFAA-R is a powerful and flexible SoC that can be used for a wide range of electronic applications. It has advanced wireless communication capabilities, uses little power, and has a small form factor.
The NRF52832-QFAA-R is a popular choice in the electronics business because it is a device that can do a lot of different things and works well. Some of its most important traits and benefits are:
Overall, the NRF52832-QFAA-R has a wide range of features and benefits that make it a very useful and efficient device that can be used for a wide range of tasks.
A shortcut is a straight link between something that happens and something that needs to be done in the same area. If a shortcut is turned on, the job it is linked to is automatically done when the event it is linked to happens. Using a link is equivalent to making the same connection through the PPI and outside of the peripheral. But the delay in propagation through the path is usually shorter than the delay in propagation through the PPI. Since shortcuts are already set up, firmware can’t change how their links work. Each shortcut has its own bit in the shortcut register, so it can be turned on or off individually. Each device can have up to 32 shortcuts.
All peripherals accept interrupts. Events are what cause interruptions. Only one interrupt can be used by a peripheral, and the interrupt number comes after the peripheral ID. For example, the Nested Vectored Interrupt Controller (NVIC) interrupt number 4 is tied to the peripheral with ID=4. Using the INTENSET, INTEN, and INTENCLR registers, an interrupt can be set up for every event that a device produces.
Interrupts can be turned on for more than one event at the same time. The event registers in the event group of peripheral registers will tell you where the interrupt came from, so you can find the right source. Some peripherals only support INTENSET and INTENCLR, and the INTEN register is not usable on those peripherals. Read each chapter for more information. Reading back the INTENSET or INTENCLR registers, on the other hand, always gives the same information as INTEN. There is a particular bit in the INTEN, INTENSET, and INTENCLR registers for each event that the peripheral can handle.
In short, the NRF52832-QFAA-R is a powerful and efficient way to combine a microcontroller unit and a radio frequency transmitter into a small and flexible package. This device is a popular choice in the electronics business because it uses little power, works well at high speeds, and has built-in security and reliability features.
The NRF52832-QFAA-R can help you save time and resources while giving you great performance, whether you’re making a new product or improving an old one. We recommend that you find out more about this gadget and think about buying it from ICRFQ, which is the largest distributor of electronic components in China. With our commitment to selling high-quality electronic parts at reasonable prices and our excellent customer service, we are the best company to work with for all your electronic part needs. Contact us today to find out more about the NRF52832-QFAA-R and our other goods and services.
WhatsApp us