OPA2335AIDR IC

Technical Specifications of OPA2335AIDR

Datasheet	OPA2335AIDR datasheet
Category	Integrated Circuits (ICs)
Family	Linear – Amplifiers – Instrumentation, OP Amps, Buffer Amps
Manufacturer	Texas Instruments
Series	–
Packaging	Tape & Reel (TR)
Part Status	Active
Amplifier Type	Zero-Drift
Number of Circuits	2
Output Type	Rail-to-Rail
Slew Rate	1.6 V/μs
Gain Bandwidth Product	2MHz
-3db Bandwidth	–
Current – Input Bias	70pA
Voltage – Input Offset	1μV
Current – Supply	570μA
Current – Output / Channel	50mA
Voltage – Supply, Single/Dual (±)	2.7 V ~ 5.5 V, ±1.35 V ~ 2.75 V
Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154″, 3.90mm Width)
Supplier Device Package	8-SOIC

Introduction

Op-amps (operational amplifiers) are essential components in the field of electronics, playing critical roles in a wide range of applications. Among the many available op-amps, the OPA2335AIDR, a member of the OPA334 and OPA335 family, stands out as a precision amplifier with outstanding features. We will go into the OPA2335AIDR in this detailed tutorial, studying its features, applications, and recommended practices for optimal performance.

Understanding the OPA2335AIDR

The OPA2335AIDR is a member of a family of CMOS operational amplifiers developed for high precision. Here are some of the op-amp’s important features:

Every component matters in the realm of precision electronics, and when it comes to operational amplifiers (op-amps), the OPA2335AIDR genuinely stands out. This exceptional device, which is part of the OPA334 and OPA335 series, has a number of qualities that make it an excellent choice for a variety of applications. Let’s take a closer look at the features that make the OPA2335AIDR so popular with engineers and designers.

● Low Offset Voltage (5µV max)

The OPA2335AIDR has an extremely low maximum offset voltage of only 5V. This capability is critical in applications where precision and accuracy are critical. Whether you’re measuring small signals or need to have a consistent output, the low offset voltage of this op-amp ensures that your results are as accurate as possible.

● Zero Drift (0.05µV/°C max)

Precision is more than just initial accuracy; it is also about maintaining that accuracy over time and across temperature ranges. The OPA2335AIDR excels in this regard, with a maximum drift of only 0.05V per degree Celsius. This means that your circuit’s performance will remain consistent even when ambient circumstances change, making it ideal for situations where temperature variations are common.

● Low Quiescent Current (285µA)

The OPA2335AIDR shines with its low quiescent current of 285A in battery-powered devices and applications where power efficiency is critical. This low power consumption ensures that your device can run for extended periods of time without fast emptying the battery.

● Single-Supply Operation

The OPA2335AIDR is intended to work with single-supply systems. It is designed for low-voltage operation, with a power supply range of +2.7V to +5.5V (1.35V to 2.75V). Because of this, it is an ideal choice for current electrical equipment that rely on single-supply voltage sources.

● Single and Dual Versions

The OPA2335AIDR’s versatility is a major feature. It is available in single and dual variants, allowing you to select the one that best meets the needs of your application. The OPA2335AIDR has you covered whether you require a single amplifier or a pair for a specific job.

● Shutdown Mode

In many applications, efficiency and power conservation are critical considerations. The shutdown mode on the OPA2335AIDR handles this. Under logic control, the amplifier can be switched from regular operation to a standby current of only 2A. This feature has the potential to greatly increase battery life and minimize overall power consumption.

● MicroSIZE Packages

When space is limited in your design, the OPA2335AIDR’s MicroSIZE packages come in handy. These small packages allow you to conserve space on your PCB while still reaping the benefits of the op-amp’s excellent performance.

Finally, the OPA2335AIDR is a versatile and capable operational amplifier that shines in applications that need precision, stability, and power efficiency. The OPA2335AIDR’s outstanding qualities make it a vital addition to your electronic toolset, whether you’re working on low-power, battery-powered devices or precise measurement systems. Its low offset voltage, minimum drift, and micro-sized packaging bring up a new world of possibilities for engineers and designers looking for high-performance performance in their projects.

Guidelines for Optimal Performance

Consider the following guidelines when using the OPA2335AIDR in your applications:

● Proper Layout

Good layout techniques are critical. For best results, connect a 0.1F capacitor across the supply pins. Design your circuit arrangement with care, avoiding temperature gradients that can induce thermoelectric effects.

● Input Common-Mode Range

Keep in mind that the input common-mode range ranges from (V-) – 0.1V to (V+) – 1.5V. To ensure accurate operation, keep your inputs inside this range.

● Internal Offset Correction

To compensate for offset voltage, the OPA2335AIDR adopts auto-zero methods. Allow it one full auto-zero cycle (about 100s) upon power-up to achieve the required precision.

● Output Swing

This op-amp can swing the output voltage to the negative rail. To ensure good precision, even below the negative rail, use adequate pull-down resistors.

Applications of the OPA2335AIDR

With their variety and precision, operational amplifiers (op-amps) have transformed the world of electronics. The OPA2335AIDR, which is part of the OPA334 and OPA335 family, is no different. With its excellent qualities, this op-amp has a wide range of applications. Let’s look at how the OPA2335AIDR helps different sectors and technology.

● Transducer Applications

Transducers are essential in transforming one type of energy into another, and they are frequently employed in sensors to monitor physical qualities like as pressure, light, or sound.

The low offset voltage and negligible drift of the OPA2335AIDR ensure precision transducer signal conditioning, resulting in accurate readings. The precision of the OPA2335AIDR is important in pressure sensors for industrial situations or photodetectors for photography.

● Temperature Measurement

Temperature measurement is critical in a wide range of industries, from climate monitoring to industrial processes and consumer electronics.

Because of its stability and low drift, the op-amp is perfect for temperature sensors. It aids in maintaining accurate measurements throughout a wide temperature range. Thermostats, weather stations, and scientific apparatus are examples of applications.

● Electronic Scales

Precision is critical in electronic scales used in manufacturing, logistics, and healthcare. The low offset voltage of the OPA2335AIDR reduces measurement mistakes, ensuring accurate weight measurements. This op-amp improves accuracy in home scales, laboratory balances, and industrial weighing systems.

● Medical Instrumentation

ECG machines and blood pressure monitors, for example, demand extreme precision for patient health and diagnosis.

The precision and minimal drift of the OPA2335AIDR help to the accuracy of medical instruments. It helps equipment like pulse oximeters and patient monitoring systems acquire clear and reliable signals.

● Battery-Powered Instruments

Portable gadgets are frequently powered by batteries, necessitating the use of energy-efficient components for longer use.

The low quiescent current of the op-amp reduces power consumption, extending battery life in devices like handheld meters, portable data recorders, and battery-powered sensors.

● Handheld Test Equipment

Handheld test equipment, such as multimeters and oscilloscopes, must be precise and compact in order to be used in the field and laboratories. The op-amp improves measurement accuracy in handheld test equipment. Its MicroSIZE packaging contributes to space-saving designs while also maintaining portability and functionality.

Finally, the OPA2335AIDR is a useful and necessary component in precision electronics. Its outstanding characteristics, such as low offset voltage, minimum drift, and low quiescent current, enable it to excel in a wide range of applications, from sensor-based transducers to medical equipment and battery-powered devices. As technology advances, the OPA2335AIDR plays an increasingly important role in offering precision and reliability across industries and applications.

Conclusion

The OPA2335AIDR is your ticket to precision, stability, and efficient power usage in electronic design. Whether your projects involve transducers, temperature measurement, or battery-powered instruments, this exceptional component ensures accuracy and reliability.

Don’t settle for less than perfection. Contact ICRFQ, a leading electronic component distributor in China, for insights, information, and competitive pricing on the OPA2335AIDR. Elevate your innovations with precision and reliability—transform your ideas into realities today with the OPA2335AIDR.

The Latest And Most Popular Parts That You May Also Like