TPD4E05U06DQAR TVS DIODE

TPD4E05U06DQAR Description

The TPDxE05U06 is an outstanding member of the family of Electrostatic Discharge (ESD) safety diodes based on unidirectional Transient Voltage Suppressor (TVS) devices. These diodes provide reliable protection against ESD strikes that are stronger than the maximum amount allowed by the international standard IEC 61000-4-2. These devices were made on purpose to have very low capacitance, which helps to reduce loading and makes them a great choice for protecting high-speed data pins.

The TPD4E05U06DQAR model of the TPDxE05U06 devices is a great choice for protecting high-speed signal pins because it has a 14V clamp, a 2.5A (8/20s) Ipp Tvs Diode Surface Mount, and 10-USON (2.5×1) dimensions. Also, it belongs to the TPDxE05U06 family of items.

TPD4E05U06DQAR Features

• Most IOs have a capacitance of between 0.42 pF and 0.5 pF.
• DC breakdown voltage 6.5 V (minimum).
• The highest leakage current is only 10 nA.
• Low power to stop ESD.
• The range of temperatures in industry is from –40°C to +125°C.
• Straight-through routing tools are easy to use.

Feature Description

The TPDxE05U06 is a group of ultra-low capacitance Transient Voltage Suppressor (TVS) diodes that protect against Electrostatic Discharge (ESD). Each device can handle ESD strikes that are above the maximum amount set by the international standard IEC 61000-4-2. The TPDxE05U06 is great for protecting any high-speed data pins because it has a very low loading capacitance.

● IEC61000-4-4 EFT Protection

The I/O pins can handle an electrical burst of up to 80 A (5/50 ns pulse, 4 kV, 50- impedance) that happens quickly. The current is sent to ground by an ESD-surge clamp. This has only been checked with the TPD4E05U06.

● IEC61000-4-5 Surge Protection

Surges of up to 2.5 A and 40 W (8/20 s pattern) can be handled by the I/O pins. This current is sent to ground by an ESD-surge clamp.

● I/O Capacitance

Each I/O pin to ground has a capacitance of 0.42 pF (TPD1E05U06), 0.5 pF (TPD4E05U06), or 0.47 pF (TPD6E05U06). These gadgets can handle up to 6 Gbps of data.

● DC Breakdown Voltage

Each I/O pin has a DC breakdown value of at least 6.5 V. This makes sure that sensitive equipment is safe from spikes that are higher than the 5.5 V reverse standoff voltage.

● Ultra-Low Leakage

Current The I/O pins have a bias of 2.5 V and a leaking current of no more than 10 nA.

● Low ESD Clamping Voltage

There is an ESD clamp on the I/O pins that can limit the voltage to 10 V (IPP = 1 A).

● Industrial Temperature Range

The industrial range for this device is from –40°C to +125°C.

● Simple, Straight-Through Routes

The way this device is set up makes it simple and easy to add safety to a layout that is already in place. The packages offer flow-through routing, which means that a current layout needs only minor changes.

TPD4E05U06DQAR Specifications

● ESD Ratings—JEDEC Specification

The TPDxE05U06 is made to protect against ESD events that are stronger than the maximum amount set by the international standard IEC 61000-4-2. The device meets the JEDEC standard for ESD protection for the human body model (HBM), with a value of 8kV for contact discharge and 15kV for air discharge.

● Thermal Information

The TPDxE05U06 has a thermal resistance of 218°C/W, which is the highest thermal resistance between the junction and the ambient temperature when natural convection is used. The device can be used in temperatures between -40°C and 85°C.

Electrical Characteristics

The TPDxE05U06 is a one-way TVS diode with a capacitance of 0.28pF, which is very low. The highest clamping voltage of the device is 7V at 3.5A, and the maximum working voltage is 5.5V. The device’s breakdown voltage (VBR) is between 6.3V and 8.5V.

Typical Characteristics

The TPDxE05U06 is a high-quality ESD protection device that works well and is durable. It is perfect for protecting high-speed signal pins because it has a very low capacitance, and the low RDYN of the activated TVS makes sure that the voltage given to the protected IC during an ESD event stays at a safe level. The 14V clamp, 2.5A (8/20s) Ipp Tvs Diode Surface Mount, and 10-USON (2.5×1) size make the TPD4E05U06DQAR a top choice for ESD protection. It is part of the TPDxE05U06 family.

Pin Configuration and Functions

The TPDxE05U06 comes in a 10-USON (2.5×1) package, which is small and doesn’t take up much room. The device has four pins. Pin 1 is connected to the anode, and Pin 2 is connected to the cathode. Pin 4 is a no-connect (NC) pin, and Pin 3 is the common ground.

Pin 1 and Pin 2 of the TPDxE05U06 are called the anode and cathode pins. They are used to connect the device in series with the data line that needs to be protected from ESD events. Normally, the diode doesn’t conduct electricity and has a high resistance to the signal line. But if an ESD strike happens, the diode conducts the current and sends it to ground. This protects the signal line and any sensitive electrical parts that are connected to it.

Pin 3 of the TPDxE05U06 is the ground pin. It is linked to the system ground and gives the ESD current an easy way to get to ground. Pin 4 (NC) is not connected to any internal part and is left disconnected while the device is running. The TPDxE05U06 is easy to add to different electrical systems because of its Pin Configuration and Functions. It protects high-speed signal lines from ESD effectively.

TPD4E05U06DQAR Application Information

The TPDxE05U06 is a type of Transient Voltage Suppressor (TVS) that uses diodes. It is mostly used to protect high-speed data lines between a human interface connector and a system by giving ESD events a way to flow to ground. When an ESD event happens, the TVS essentially sends the current to ground, which causes the voltage across the diode to drop only slightly.

This voltage, which is called VCLAMP, is the highest voltage that can be put on the secured IC, which keeps it safe. The triggered TVS has a low RDYN that helps keep VCLAMP at a safe level for the protected IC, keeping it from any damage that could be caused by ESD events.

Conclusion

Even though it has a very low capacitance, the TPDxE05U06 Transient Voltage Suppressor (TVS) diode provides reliable safety against Electrostatic Discharge (ESD) events. It has a low loading capacitance and meets the international standard for ESD protection, IEC 61000-4-2. This makes it a great choice for protecting high-speed data pins. With the TPD4E05U06DQAR from the TPDxE05U06 family’s great TPD4E05U06DQAR, it’s easy to protect high-speed signal pins. It has a 14V clamp, a 2.5A (8/20s) Ipp Tvs Diode Surface Mount, and 10-USON (2.5×1) dimensions. It is a great choice for protecting electrical devices because it has a high DC breakdown voltage, low leakage current, low ESD clamping voltage, and an operating temperature range that is good for industrial use. Because the TPDxE05U06 is easy to set up and has straight-through routing, it can be used to improve security while causing as little damage as possible to current infrastructure.

Looking for more information or to order TPD4E05U06DQAR? Contact ICRFQ, your leading electronic component distributor in China. We guarantee to provide you with the best product at an affordable price. Don’t hesitate to reach out to us today!

The Latest And Most Popular Parts That You May Also Like