Part Number: XC3S200-4PQG208C

Manufacturer: AMD

Description: IC FPGA 141 I/O 208QFP

Shipped from: Shenzhen/HK Warehouse

Stock Available: Check with us

Technical Specifications of XC3S200-4PQG208C

Datasheet  XC3S200-4PQG208C datasheet
Category Integrated Circuits (ICs)
Family Embedded – FPGAs (Field Programmable Gate Array)
Manufacturer Xilinx Inc.
Series Spartan?-3
Part Status Active
Number of LABs/CLBs 480
Number of Logic Elements/Cells 4320
Total RAM Bits 221184
Number of I/O 141
Number of Gates 200000
Voltage – Supply 1.14 V ~ 1.26 V
Mounting Type Surface Mount
Operating Temperature 0°C ~ 85°C (TJ)
Package / Case 208-BFQFP
Supplier Device Package 208-PQFP (28×28)


The XC3S200-4PQG208C is a Spartan®-3 Field Programmable Gate Array (FPGA) IC that is both powerful and affordable. It has a lot to offer electronics makers. This FPGA is a powerful tool for many applications because it has more logic resources, better performance, and better clock management features. It is a good choice for consumer electronics projects because it can be used in many ways and has benefits over mask-programmed ASICs.

Overview of the Spartan®-3 Family

The Spartan®-3 family of FPGAs is a big step up from the Spartan-IIE family. It has more features and works better than the Spartan-IIE family. The Spartan®-3 family builds on the success of its predecessor and adds improvements in a number of areas, such as logic resources, internal RAM capacity, I/O count, and overall speed. With these improvements and the use of Virtex®-II platform technology, the Spartan®-3 FPGAs are able to provide better features and bandwidth at a lower cost, setting new standards for programmable logic.

Improvements were made to the Logic Resources, Internal RAM, and I/Os. The Spartan®-3 family has more logic resources, which means designers can make more complex designs and add more advanced features. This bigger pool of resources makes it possible to make systems that are more complex. Also, the FPGA’s internal RAM capacity has been greatly increased, which makes it easier to store and process data. Also, the overall number of I/Os has gone up, giving you more ways to connect to devices and systems outside of the computer.

Leveraging Virtex®-II Platform Technology

The Spartan®-3 FPGAs use the advanced features and powers of the Virtex®-II platform technology, which has been very successful. By using key parts of the Virtex®-II platform, like design improvements and process technology, the Spartan®-3 FPGAs can do more and work better. Because of this combination of technologies, the Spartan®-3 FPGAs can offer more functionality and bandwidth per dollar than was possible before in the programmable logic business.

Cost-Effectiveness and Versatility

One thing that makes the Spartan®-3 family stand out is how cost-effective it is. These FPGAs are a cheaper option to mask-programmed ASICs because they don’t have the high development costs that come with making an ASIC. Also, Spartan®-3 FPGAs are more flexible and have faster development cycles, so design changes can be made in the field without having to replace hardware. This makes the Spartan®-3 FPGAs the best choice for consumer electronics apps like broadband access, home networking, display and projection systems, and digital TV equipment.

XC3S200-4PQG208C Key Features and Specifications

The XC3S200-4PQG208C FPGA has a number of features and specs that help it work well and be flexible:

  • Logic Resources: Compared to earlier generations, the XC3S200-4PQG208C has more logic resources, which lets it be used for more complex designs and more advanced functions. With these many logic tools, designers can make applications that are unique and full of features.
  • RAM Capacity: This FPGA has a lot of RAM built in, which makes it easy to store and process data within the device. The large amount of RAM allows designers to work with large datasets, create algorithms that use a lot of data, and support high-performance apps.
  • I/O Count: The XC3S200-4PQG208C has a large number of I/O pins, which gives it a lot of ways to connect to devices and systems outside of itself. The high number of I/Os makes it easy to connect to different peripherals, sensors, and data interfaces. This makes it suitable for a wide range of applications.
  • Better Clock Management: The XC3S200-4PQG208C FPGA has better clock management features that make a big difference in how well it works overall. These advanced clocking features allow exact synchronization and distribution of clock signals throughout the design. This makes sure that the timing is correct and that the design works reliably.
  • Specifications that make the XC3S200-4PQG208C stand out include its 208-BFQFP package, which has a compact and easy-to-use shape that makes it easy to add to electrical systems. The design and size of the package make it good for applications with limited room while still letting heat escape well.

Also, the XC3S200-4PQG208C FPGA uses advanced process technology and design methods to give you the best performance, reliability, and power efficiency. It gives designers a platform that is reliable and flexible for putting their ideas into action. This speeds up the development and deployment of FPGA-based solutions.

Advantages over mask-programmed ASICs

The XC3S200-4PQG208C FPGA is much better than mask-programmed ASICs in many ways:

  • Cost: FPGAs are cheaper than ASICs because they have lower up-front costs and can be made in different quantities.
  • Development processes: FPGA development processes are shorter, which lets designers make changes quickly and get products to market faster.
  • Freedom: FPGAs offer the most freedom in design, making it easy to make changes and updates even after the system has been put into use.
  • Field Upgradability: FPGAs can be updated in the field without replacing the hardware, which makes it easy to fix bugs and add new features.

When designers choose the XC3S200-4PQG208C FPGA, they can save money, speed up development, make their designs more flexible, and make changes in the field easier.

XC3S200-4PQG208C Applications

The XC3S200-4PQG208C FPGA is used in a variety of consumer products, such as:

  • Broadband Access: It gives cable modems, DSL routers, and network switches the power to process data quickly and connect to the Internet at high speeds.
  • Home networking: Its high I/O count and improved clock management features make it easy for wireless routers, smart home systems, and IoT gateways to connect.
  • Digital TV Equipment: In digital TV sets and set-top boxes, the FPGA handles video decoding, format conversion, and signal processing. This makes for a better multimedia experience.

The features of the XC3S200-4PQG208C are great for these applications because it has a lot of logic resources, can process data quickly, and has strong I/O support. It has been used successfully in broadband routers, home control systems, and digital TV equipment, which shows how flexible and dependable it is.


The XC3S200-4PQG208C is a Spartan®-3 FPGA IC that is both powerful and affordable. It is made for a wide range of consumer electronics uses. With more logic resources, better performance, and more advanced clock management functions, it offers great flexibility and usefulness at a price that is easy on the wallet. Compared to mask-programmed ASICs, it is less expensive, takes less time to make, and can be updated in the field without replacing the hardware.

ICRFQ is where you can find out more about the XC3S200-4PQG208C and other electronic parts, as well as buy them. Unlock the XC3S200-4PQG208C’s potential and bring your consumer electronics projects to life in a way that is efficient and new. Contact ICRFQ right away to find out what this amazing gadget can do and to get the electronic components you need.

4.8/5 - (397 votes)
Kevin Chen