ZXMP6A17E6TA MOSFET

Technical Specifications of ZXMP6A17E6TA

Datasheet	ZXMP6A17E6TA datasheet
Category	Discrete Semiconductor Products
Family	Transistors – FETs, MOSFETs – Single
Manufacturer	Diodes Incorporated
Series	–
Packaging	Tape & Reel (TR)
FET Type	MOSFET P-Channel, Metal Oxide
FET Feature	Standard
Drain to Source Voltage (Vdss)	60V
Current – Continuous Drain (Id) @ 25°C	2.3A (Ta)
Rds On (Max) @ Id, Vgs	125 mOhm @ 2.3A, 10V
Vgs(th) (Max) @ Id	1V @ 250μA
Gate Charge (Qg) @ Vgs	17.7nC @ 10V
Input Capacitance (Ciss) @ Vds	637pF @ 30V
Power – Max	1.1W
Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Supplier Device Package	SOT-26

Introduction

The metal-oxide semiconductor field-effect transistor (MOSFET) plays a crucial role in obtaining high efficiency and excellent performance in the fields of power management and electronics. The ZXMP6A17E6TA is one of the best examples of these technological wonders because of how meticulously it was designed to reduce on-state resistance while still providing top-notch switching performance. Learn all about the ZXMP6A17E6TA MOSFET and its many uses by reading this detailed guide covering its features, advantages, and essential characteristics.

Key Features and Benefits

The ZXMP6A17E6TA MOSFET is built to be at the forefront of today’s rapidly evolving electronics industry by setting the standard for both efficiency and performance. This component is perfect for a variety of power management uses because of its low on-state resistance and high switching performance. In this detailed tutorial, we’ll investigate the ZXMP6A17E6TA’s most salient characteristics, illuminating its usefulness and adaptability in the field of electronics.

Unveiling the ZXMP6A17E6TA

Core Features and Benefits

● On-Resistance is low.

The ZXMP6A17E6TA is designed with a low on-state resistance. This functionality is critical in power management applications for lowering power losses and increasing overall efficiency. Reduced on-resistance reduces voltage dips across the MOSFET, resulting in lower power dissipation and increased energy efficiency.

● Quick Switching Speed

Switching must be quick and efficient, especially in applications that require quick changes. In this regard, the ZXMP6A17E6TA shines, with rapid switching speeds that ensure near-instantaneous switching between the on and off states. This feature reduces switching losses and contributes greatly to energy efficiency.

● Threshold is low

The low threshold voltage of the MOSFET makes it very responsive to control signals. Because of the low threshold, the ZXMP6A17E6TA can switch on and off with a low gate drive voltage, boosting energy conservation in situations where power efficiency is a main issue.

● Driveway with a Low Gate

The ZXMP6A17E6TA’s reduced gate drive requirements further improve efficiency and power savings. It can be regulated successfully with a low gate voltage, lowering the energy required for switching operations.

● Input Capacitance Is Low

The ZXMP6A17E6TA has a low input capacitance, which simplifies control and reduces switching times. This feature is critical in guaranteeing fast and precise functioning, which contributes to the MOSFET’s excellent performance.

● Environmentally Conscious

The ZXMP6A17E6TA is developed as a “green” device in an era when environmental responsibility is vital. It is halogen and antimony free, fully RoHS compliant, and encourages sustainable, eco-friendly design techniques that are in line with modern environmental norms and regulations.

● High Dependability

The ZXMP6A17E6TA has been certified to fulfill AEC-Q101 high reliability standards. As a result, it is a trusted solution for demanding applications requiring continuous performance and long-term operation. Because of its great durability, it can withstand extreme circumstances, making it suited for a wide range of applications, including automotive electronics.

Applications

Because it possesses such an excellent assortment of characteristics and advantages, the ZXMP6A17E6TA is an ideal component for a wide variety of high-efficiency power management applications, including the following:

• DC-DC Converters:Increase the effectiveness of voltage conversion and cut down on power losses.
• Motor Control:Make it possible to exercise effective control over motors in a variety of applications, from robotics to industrial automation.
• Battery Management:Charge and discharge procedures for batteries should be optimized to achieve maximum battery life.
• Voltage Regulation:For the sake of supporting sensitive electronic devices, ensure that the voltage levels in the power supplies remain stable.
• LED Lighting:Lighting applications can benefit from a more precise and energy-saving method of driving high-power LEDs.
• Automotive Electronics:The AEC-Q101 qualification assures that it satisfies the stringent criteria of the automobile sector, which places an emphasis on dependability above all else.

Mechanical Specifications

The ZXMP6A17E6TA, in addition to its amazing features, also provides sturdy mechanical specifications that boost its practicability and versatility, including the following:

● Case: SOT-26

The MOSFET can be housed in a dependable and space-saving housing thanks to the SOT-26 casing. Because of its compact size, it is well suited for use in applications that have limited space, yet it still manages to maintain the necessary level of robustness.

● Case Material

Molded plastic, which has a flammability certification rating of 94V-0 from the UL, is used to construct the casing material, which guarantees both its longevity and its safety. This classification denotes that the material is flame-resistant, which enables it to be utilized in a diverse array of contexts due to its adaptability.

● Moisture Sensitivity: Level 1 per J-STD-020

The ZXMP6A17E6TA is well-suited to operate reliably in humid situations thanks to its moisture sensitivity level of 1, as specified by J-STD-020. This ensures that its performance will remain consistent even when faced with tough conditions.

● Terminals

Matte tin that has been annealed and applied over a copper lead frame serves as the finish for the MOSFET’s terminals. Because this architecture can be soldered in accordance with MIL-STD-202, Method 208, it will be simple for you to include it into your designs while also assuring that the electrical connections will be reliable.

● Weight: Approximately 0.018 grams (Approximate)

The MOSFET is a relatively light component, coming in at around 0.018 grams total. Because of its low weight, its inclusion into a wide variety of applications is made much easier, and it does so without placing undue strain on the entire system.

Conclusion

The ZXMP6A17E6TA MOSFET stands at the forefront of cutting-edge electronic components, poised to revolutionize your electronic designs. Offering a trifecta of low on-resistance, lightning-fast switching speed, and eco-conscious attributes, it presents itself as the ultimate choice for applications that demand unwavering reliability and a substantial reduction in power consumption.

Whether your projects involve the intricacies of power supplies, motor controls, or any other facet of electronics demanding masterful power management, the ZXMP6A17E6TA is your unequivocal ally. Contact us at ICRFQ, a distinguished electronic component distributor in China, and seize the opportunity to infuse your creations with this groundbreaking MOSFET. By doing so, you unlock the benefits of minimal power losses, a noticeable decrease in energy consumption, and a guarantee of steadfast operation.

The Latest And Most Popular Parts That You May Also Like