74HC4053D
Part Number: 74HC4053D
Manufacturer: Nexperia USA Inc.
Description: IC SWITCH SPDT X 3 120OHM 16SO
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
ICRFQ.com - Electronic Components Distributor in China Since 2003
Part Number: 74HC4053D
Manufacturer: Nexperia USA Inc.
Description: IC SWITCH SPDT X 3 120OHM 16SO
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
Datasheet | 74HC4053D,652 datasheet |
---|---|
Category | Integrated Circuits (ICs) |
Family | Interface – Analog Switches, Multiplexers, Demultiplexers |
Manufacturer | NXP Semiconductors |
Series | – |
Packaging | Tube |
Part Status | Active |
Switch Circuit | SPDT |
Multiplexer/Demultiplexer Circuit | 2:1 |
Number of Circuits | 3 |
On-State Resistance (Max) | 120 Ohm |
Channel-to-Channel Matching (ΔRon) | 6 Ohm |
Voltage – Supply, Single (V+) | 2 V ~ 10 V |
Voltage – Supply, Dual (V±) | ±1.5 V ~ 5 V |
Switch Time (Ton, Toff) (Max) | 31ns, 29ns |
-3db Bandwidth | 170MHz |
Charge Injection | – |
Channel Capacitance (CS(off), CD(off)) | 3.5pF |
Current – Leakage (IS(off)) (Max) | 100nA |
Crosstalk | -60dB @ 1MHz |
Operating Temperature | -40°C ~ 125°C (TA) |
Package / Case | 16-SOIC (0.154″, 3.90mm Width) |
Supplier Device Package | 16-SO |
The 74HC4053D is an integrated circuit (IC) that functions as a CMOS analog multiplexer/demultiplexer, selecting and routing analog signals between various input and output channels. It is widely used in audio, video, and communication circuits to switch and route analog signals. There are three analog switches in the device, each with its own input for selecting channels. The 74HC4053D is ideally suited for low-voltage and battery-powered applications due to its wide operating voltage range, low on-resistance, and low power consumption.
The 74HC4053 and 74HCT4053 are used as analog switches with triple single-pole double-throw configurations when an analog or digital 2:1 multiplexer or demultiplexer is needed (3x SPDT). Each switch has a digital select input (Sn), two separate inputs/outputs (nY0 and nY1), and an extra input and output on top of the standard ones (nZ).
Each switch has a digital input with the letter “E” and the word “enable” written on it. When E is in the HIGH position, none of the switches work. Each of the inputs has a clamp diode built into it. So, if current-limiting resistors are used to connect the inputs, they can be linked to voltages higher than V CC.
There are three analog switches on the 74HC4053D, and each one has its own control input. So, you can choose any one of the three analog signals and send it to one of the three different output channels.
The 74HC4053D is a great choice for a wide range of analog signal routing and switching applications because it works well and can be used in many different ways. This is true because it works so well. The component can be used in a wide range of electronic circuits because it has a wide voltage range and switches in a break-before-make way. When it comes to making sure that signal switching is accurate and reliable, this part’s low power consumption, low on-resistance, and superior noise immunity are all very important.
Here are the most important things about the way the 74HC4053D works electrically:
The range of voltages that a device can accept as its power source is called its input voltage range. The 74HC4053D works well with a wide range of supply voltages, from 2V all the way up to 12V. Because of this, it works well for a wide range of applications that use low voltage or batteries.
The range of voltages that the device can handle at its input and output pins is the input/output voltage range. The 74HC4053D can switch analog signals accurately and can work with other parts of the circuit because it can handle voltages from 0V to VCC. This makes sure that the device can talk to the rest of the parts in the circuit.
When we talk about a device’s “on-resistance,” we mean the resistance of the switch when it is in the “on” position. The 74HC4053D has a low on-resistance, which is usually around 125. This helps reduce signal distortion and provides accurate signal switching.
Off-leakage current is the current that flows through the device even when the switch is turned off. The 74HC4053D has a low off-leakage current of about 1 nA. This makes it harder for outside noise sources to affect how the device works.
The enable input voltage range is the range of voltages that the device can handle at its enable input pins. The enable input voltage range for the 74HC4053D is from to VCC, which can be positive or negative.
When the enable input switch is turned on, the device lets a current in. This current is called the “enable input current.” Most of the time, the amount of current that flows through the enable input of the 74HC4053D is 1 microampere.
When talking about the input capacitance of a device, what is being measured is the capacitance at the device’s input pins. In high-speed switching applications, the 74HC4053D’s performance could be hurt if its input capacitance, which is usually 10 pF, is too high.
The switching time is the amount of time it takes for the device to switch from monitoring one channel to monitoring another. The time it takes for the 74HC4053D to switch is usually measured in microseconds (ns).
Some of the most important electrical parts of the 74HC4053D are shown in the tables below:
Parameter | Condition | Min | Typ | Max | Unit |
Supply voltage | 2 | 5 | 12 | V | |
Input/output voltage | 0 | VCC | V | ||
On-resistance | VCC = 4.5V | 125 | Ω | ||
Off-leakage current | VCC = 4.5V | 1 | nA |
Parameter | Condition | Min | Typ | Max | Unit |
Enable voltage | 0 | VCC | V | ||
Enable current | 1 | µA | |||
Input capacitance | 10 | pF | |||
Switching time | VCC = 4 |
In conclusion, the 74HC4053D is a strong and flexible analog switch that can make designing circuits easier and switching signals more efficient. Its features make it ideal for use in a wide range of applications, and its reliability and performance make it an important component for any electronic design project.
If you’re looking for a reliable source of electronic components, consider contacting ICRFQ. We provide the 74HC4053D at a competitive price, with a knowledgeable team and fast delivery. Explore ICRFQ today to see how we can help with your upcoming project and get the components you need to bring your designs to life.
WhatsApp us