W25Q16DVSSIG
Part Number: W25Q16DVSSIG
Manufacturer: Winbond Electronics
Description: IC Flash 16 Mbit SPI/QUAD 8SOIC
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
ICRFQ.com - Electronic Components Distributor in China Since 2003
Part Number: W25Q16DVSSIG
Manufacturer: Winbond Electronics
Description: IC Flash 16 Mbit SPI/QUAD 8SOIC
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
Datasheet | W25Q16DVSSIG datasheet |
---|---|
Category | Integrated Circuits (ICs) |
Family | Memory |
Manufacturer | Winbond Electronics |
Series | SpiFlash? |
Packaging | Tube |
Part Status | Active |
Format – Memory | FLASH |
Memory Type | FLASH – NOR |
Memory Size | 16M (2M x 8) |
Speed | 104MHz |
Interface | SPI Serial |
Voltage – Supply | 2.7 V ~ 3.6 V |
Operating Temperature | -40°C ~ 85°C (TA) |
Package / Case | 8-SOIC (0.209″, 5.30mm Width) |
Supplier Device Package | 8-SOIC |
The W25Q16DVSSIG is a highly capable and versatile Serial Flash memory device that offers a storage solution for systems with limited space, pins, and power requirements. With its advanced features and flexibility, it surpasses the capabilities of ordinary Serial Flash devices. In this comprehensive guide, we will delve into the various aspects of the W25Q16DVSSIG, exploring its organization, performance, interface options, and application potential.
A 16-bit Serial Flash memory called the W25Q16DVSSIG offers a small storage option for systems with constrained space, pins, and power needs. It is a member of the 25Q family and provides superior performance and versatility above and beyond that of typical Serial Flash devices. The W25Q16DVSSIG is a cutting-edge device that is made to suit the demands of contemporary embedded systems.
A Serial Flash memory device called the W25Q16DVSSIG was created to offer effective and trustworthy storage options for systems with constrained space, pins, and power needs. It includes a variety of features and capabilities that improve its functionality and adaptability. The main functions and capabilities of the W25Q16DVSSIG are outlined in this functional description.
The memory array in the W25Q16DVSSIG is divided into 8,192 programmable pages, with 256 bytes per page. The flexibility in information management provided by this architecture enables efficient data storage and retrieval within the device.
The device supports the Serial Peripheral Interface (SPI) standard for read and write operations. The Read Data (03h) command enables speedy recovery of saved data by reading data from the memory. Data can be written into memory using the Page Program (02h) command and the Write Enable (06h) instruction. It is possible to program 256 bytes at once.
The W25Q16DVSSIG offers a range of erasing choices to meet a range of requirements. Sector, block, and chip erase procedures are supported. Blocks can be deleted in groups of 128 (32KB block erase), sectors can be erased in groups of 16 (4KB sector erase), or the entire chip can be erased (chip erase). Depending on the requirements of the application, this flexibility enables exact and effective data erasure.
When compared to conventional Serial Flash memory, the device’s high-performance dual or quad SPI choices enable quicker data transmission rates. Increased throughput is possible with Dual/Quad output and Dual/Quad I/O SPI modes thanks to the use of several data lines and parallel data transfer. The device’s overall performance in data-intensive applications is improved by this capability.
The W25Q16DVSSIG uses little power while operating from a single 2.7V to 3.6V supply. In active mode, it uses only 4 mA, which reduces power consumption and lengthens battery life in power-sensitive applications. When in power-down mode, the current consumption can be as low as 1 A, substantially lowering the amount of energy used when no one is using the device.
Additional control options and security features are offered by the device. It has two pins: a Write Protect pin and a Hold pin, which can be used to manage memory operations and guard against unauthorized changes. Options for programmable write protection enable fine-grained control of write access to particular memory regions. The flexibility of array management is further increased by top- or bottom-array control.
The W25Q16DVSSIG complies with the JEDEC standard for manufacturer and device identification, which includes a 64-bit Unique Serial Number. This compliance guarantees interoperability and standardization with other devices and makes it easier to integrate into various systems.
The W25Q16DVSSIG Serial Flash memory device offers a variety of capabilities and features that facilitate effective data management, storage, and retrieval. The W25Q16DVSSIG is a good choice for applications that need dependable and high-performance storage solutions due to its flexible memory organization, quick transfer rates, low power consumption, and control and security features.
The W25Q16DVSSIG Serial Flash memory device offers control flexibility and security features to enhance its functionality and protect data integrity.
The Hold pin enables the momentary suspension of ongoing activities while maintaining the device’s present state. It permits interruptions without corrupting or losing data.
When asserted, the Write Protect (WP) pin stops write operations, protecting data from unauthorized changes or unintentional overwriting.
The device features programmable write protection, allowing users to choose particular memory blocks or areas that are shielded from write operations. This feature ensures the integrity and confidentiality of the data.
User configuration of the memory structure can be done by choosing top or bottom array control.
Final Thoughts
The W25Q16DVSSIG Serial Flash memory offers a comprehensive storage solution with its advanced features, performance capabilities, and versatile interface options. Its ability to operate on a low power supply makes it suitable for a wide range of applications. Whether it is code shadowing, data storage, or parameter management, the W25Q16DVSSIG provides an efficient and reliable solution. By understanding its technical specifications, interface options, and security features, developers can harness the full potential of this powerful Serial Flash memory device in their systems. Contact us at ICRFQ, for more infomration and to oder this device. We are the leading Electronic Components Distributer in china.
WhatsApp us