BTS4140N
Part Number: BTS4140N
Manufacturer: Infineon Technologies
Description: IC PWR SWTCH N-CHAN 1:1 SOT223-4
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
ICRFQ.com - Electronic Components Distributor in China Since 2003
Part Number: BTS4140N
Manufacturer: Infineon Technologies
Description: IC PWR SWTCH N-CHAN 1:1 SOT223-4
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
Datasheet | BTS4140NHUMA1 datasheet |
---|---|
Category | Integrated Circuits (ICs) |
Family | PMIC – Power Distribution Switches, Load Drivers |
Manufacturer | Infineon Technologies |
Series | – |
Packaging | Tape & Reel (TR) |
Part Status | Active |
Switch Type | General Purpose |
Number of Outputs | 1 |
Ratio – Input:Output | 1:1 |
Output Configuration | High Side |
Output Type | N-Channel |
Interface | On/Off |
Voltage – Load | 4.9 V ~ 60 V |
Voltage – Supply (Vcc/Vdd) | Not Required |
Current – Output (Max) | 200mA |
Rds On (Typ) | 1 Ohm |
Input Type | Non-Inverting |
Features | Auto Restart |
Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
Operating Temperature | -40°C ~ 150°C (TJ) |
Package / Case | TO-261-4, TO-261AA |
Supplier Device Package | PG-SOT223-4 |
The BTS4140N is made by Infineon Technologies. It is a high-performance Power Distribution Switch and Load Driver. It is made for general-purpose uses and has many features, such as fault protection, current regulating, over-temperature protection, and over-voltage protection. This in-depth guide will go into detail about the BTS4140N’s features, uses, and benefits, giving you a full picture of this cutting-edge integrated circuit.
The BTS4140N is an N-Channel Load Driver with one output and a 1:1 split between input and output. It is made to work in high-side configurations, so it can be used in a wide range of industry and automotive settings. The device has a low Rds On of 1 Ohm, which lets current move well and keeps power losses to a minimum.
The BTS4140N is appropriate for a wide range of applications, from automotive systems with lower voltages to industrial applications needing higher voltage handling due to its wide input voltage range of 4.9V to 60V. Because of its versatility, the BTS4140N can be used in a variety of projects without the need for additional voltage regulation circuitry, which lowers system complexity and costs.
The non-inverting input interface also makes it easier to control and run the BTS4140N in circuits. Engineers may quickly incorporate the device into their designs and effectively handle load control without the need for complicated additional circuitry because it offers a simple control mechanism. The BTS4140N’s user-friendliness is improved by its streamlined interface, making it the go-to option for applications where controllability is crucial.
Due to its reliable characteristics and adaptable performance, the BTS4140N finds use in a variety of sectors. Key areas of application include:
The operating temperature range of the BTS4140N is -40°C to 150°C (TJ). It is ideally suited for a variety of demanding settings and automotive applications because to its wide working temperature range. Let’s see how the device’s performance and dependability in these circumstances are improved by the wider temperature range:
Equipment must frequently function in hostile environments with high temperatures. The BTS4140N is suitable for use in cold locations such refrigeration units, outdoor installations, or industrial facilities located in colder regions because it can operate dependably in temperatures as low as -40°C.
Some industrial processes produce a lot of heat, which subjects electronic components to high temperatures. With a maximum operating temperature of 150 °C, the BTS4140N is guaranteed to be stable and functional even in these high-temperature settings, preventing any performance degradation or failure.
Automotive electronics are subjected to a range of temperatures, particularly in the engine compartment, where operating temperatures can soar dramatically. The BTS4140N’s broad temperature range enables it to function well even in difficult operating conditions inside automobiles, where heat dissipation might be difficult.
Automotive systems must contend with cold starts, particularly in colder areas or throughout the winter. The BTS4140N’s capacity to function at -40°C means that it can dependably operate during cold starts, which helps the electronics and power management in automobiles run smoothly.
The BTS4140N’s wide temperature range tolerance is a testament of its strong construction and the use of premium materials, which can tolerate temperature changes without sacrificing performance.
The likelihood of thermal stress-induced failures is reduced by the device’s ability to withstand severe temperatures, which also guarantees dependable load control in a variety of climatic circumstances.
Components that can function effectively throughout a wide temperature range frequently have longer life cycles and are more reliable. In applications where dependability is crucial, the BTS4140N’s ability to withstand a wide temperature range adds to increased device longevity and lower maintenance costs.
Because of its wide operating temperature range of -40°C to 150°C (TJ), the BTS4140N is appropriate for use in demanding situations such abrasive automotive settings and industrial applications with high temperature ranges. Because of its consistency in load control, robustness, and longevity across such a broad temperature range, it is a dependable option for many demanding applications in the industrial and automotive sectors.
A high-performance Power Distribution Switch and Load Driver, the BTS4140N from Infineon Technologies is ideal for use in automotive, industrial, robotic, and power management settings. This flexible component guarantees dependable and efficient load control with features like auto-restart, fault protection, and a wide input voltage range. Get your hands on some BTS4140N right now from China’s leading electronic component distributor ICRFQ and give your designs a boost in speed, accuracy, and durability.
WhatsApp us