DSEI60-06A
Part Number: DSEI60-06A
Manufacturer: IXYS
Description: DIODE GEN PURP 600V 60A TO247AD
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
ICRFQ.com - Electronic Components Distributor in China Since 2003
Part Number: DSEI60-06A
Manufacturer: IXYS
Description: DIODE GEN PURP 600V 60A TO247AD
Shipped from: Shenzhen/HK Warehouse
Stock Available: Check with us
Datasheet | DSEI60-06A datasheet |
---|---|
Category | Discrete Semiconductor Products |
Family | Diodes – Rectifiers – Single |
Manufacturer | IXYS |
Series | – |
Packaging | Tube |
Diode Type | Standard |
Voltage – DC Reverse (Vr) (Max) | 600V |
Current – Average Rectified (Io) | 60A |
Voltage – Forward (Vf) (Max) @ If | 1.8V @ 70A |
Speed | Fast Recovery =< 500ns, > 200mA (Io) |
Reverse Recovery Time (trr) | 50ns |
Current – Reverse Leakage @ Vr | 200μA @ 600V |
Capacitance @ Vr, F | – |
Mounting Type | Through Hole |
Package / Case | TO-247-2 |
Supplier Device Package | TO-247AD |
Operating Temperature – Junction | -40°C ~ 150°C |
The DSEI60-06A is a high-power rectifier diode made for uses that need to change alternating current (AC) to direct current (DC) in a reliable and efficient way. This detailed guide gives an in-depth look at the DSEI60-06A diode, including its specs, features, uses, and important things to keep in mind.
A rectifier diode is a semiconductor device that only lets current flow in one way, turning alternating current (AC) into direct current (DC). It works like a one-way switch for electricity. When the voltage at the anode is higher than the voltage at the cathode, the diode becomes forward-biased, allowing current to flow from the anode to the cathode. When the voltage at the cathode is higher than at the anode, on the other hand, the diode becomes reverse-biased and stops the current from flowing.
Rectifier diodes are often used in power supplies, voltage regulators, and other electrical circuits where AC-to-DC conversion is needed. They are very important because they change the varying voltage of AC power sources into a steady DC voltage that can be used in many electronic devices and uses.
The maximum ratings show the exact most that the DSEI60-06A diode can handle without breaking or getting damaged. These values are very important to make sure that the diode works in a safe way. If you go over these limits, the diode could get damaged in a way that can’t be fixed. The following are some of the usual maximum ratings for the DSEI60-06A diode:
The electrical characteristics tell us how the DSEI60-06A diode usually works under certain operating situations. The manufacturer gives these numbers, which can be used as a guide for designing and analyzing circuits. Some of the most common electricity features are:
The DSEI60-06A diode is made to handle high amounts of current, which makes it a good choice for power electronics applications that need to carry a lot of current. With a maximum forward current (IF) value of 60 amperes, this diode can handle large amounts of electrical current and power many high-power devices and circuits.
The peak inverse voltage (PIV) of the diode is 600V, which is high. Because of this high voltage limit, the DSEI60-06A can safely handle high reverse voltages. This is especially helpful in situations where the diode needs to be able to handle voltage jumps and changes.
The DSEI60-06A diode is made to switch quickly between its conducting and non-conducting states. High-frequency applications and circuits that need to switch quickly, like switching power sources and motor drives, need fast switching speeds. The ability to switch quickly helps lower switching losses and improves the overall efficiency of the circuit.
When it is moving current in the forward direction, the diode has a low forward voltage drop (VF). In power electronics, you want a low forward voltage drop because it reduces power losses and makes the whole system more efficient. This is especially important in high-power systems where power loss is a problem.
The DSEI60-06A diode is built to be strong, so it can handle a wide range of working stresses and environmental conditions. Its long-lasting design makes it more reliable and increases the diode’s useful life, making it a good choice for uses that need long-term performance and stability.
A Through-Hole TO-247AD package holds the DSEI60-06A diode. This type of package has leads that go all the way through the PCB (printed circuit board). This makes it easy to place and secure to the PCB. The mechanical shape of the TO-247AD package also gives it better thermal performance, which makes it easier for heat to get rid of itself during operation.
Overall, the DSEI60-06A diode’s high current carrying capacity, high voltage rating, fast switching speed, low forward voltage drop, sturdy design, and user-friendly TO-247AD package make it a flexible and reliable component for many power electronics applications. The DSEI60-06A diode works well and efficiently in power supplies, motor drives, and other systems with a lot of power.
In conclusion, the DSEI60-06A diode is an exceptional rectifier capable of handling high currents and voltages efficiently. Whether you’re an engineer, hobbyist, or researcher, this diode will add value to your power electronics projects. To learn more and order the DSEI60-06A at an affordable price, contact ICRFQ, a leading electronic components distributor in China. Empower your projects with cutting-edge technology today!
WhatsApp us