Part Number: ZM5202AE-CME3R

Manufacturer: Silicon Labs


Shipped from: Shenzhen/HK Warehouse

Stock Available: Check with us

Technical Specifications of ZM5202AE-CME3R

Category RF/IF and RFID
Family RF Transceiver Modules
Manufacturer Sigma Designs Inc.
Series Z-Wave?
Packaging Tape & Reel (TR)
Part Status Active
RF Family/Standard General ISM < 1GHz
Protocol Z-Wave?
Frequency 868MHz
Data Rate 100Kbps
Power – Output 4dBm
Sensitivity -103dBm
Serial Interfaces SPI, UART, USB
Antenna Type
Memory Size 128kB Flash, 16kB SRAM
Voltage – Supply 2.3 V ~ 3.6 V
Current – Receiving 32mA
Current – Transmitting 41mA
Mounting Type Surface Mount
Operating Temperature
Package / Case Module

ZM5202AE-CME3R Introduction

Z-Wave® transceiver modules are important parts of wireless communication systems. They make it easy for smart home automation and Internet of Things (IoT) devices to talk to each other. The ZM5202AE-CME3R is an important Z-Wave® receiver module. It has a surface mount package and works at a frequency below 1GHz (868MHz). Its small size makes it good for applications with limited room. In this guide, we’ll look at its features, how it works, what conditions are best, and how it can be used. This will help writers use its features in wireless communication systems.

Overview of ZM5202AE-CME3R

The ZM5202AE-CME3R is a small Z-Wave® receiver module that can be used in many different ways. Here’s what you need to know about this module:

  • The way it looks and how it is packaged: The ZM5202AE-CME3R has a surface mount package and a small form factor. Its small size makes it easy to fit into PCB designs, so it can be used in applications where room is limited.
  • General ISM Transceiver Module: The ZM5202AE-CME3R works as a general Industrial, Scientific, and Medical (ISM) transmission module. It makes wireless contact possible in the range of frequencies below 1GHz, making it a reliable and efficient way to send data.
  • Operating Frequency of 868MHz: The 868MHz operating frequency of the ZM5202AE-CME3R is a notable trait. In places where this frequency range is controlled, this frequency band is often given to Z-Wave® applications. By working at 868MHz, the module makes sure that it is compatible and follows the rules for frequencies in these areas.

The 868MHz working frequency of the ZM5202AE-CME3R makes it a good choice for building strong wireless networks and making it easy for Z-Wave® systems to talk to each other. Its small size and surface mount package make it easy to use in many different situations and make it more flexible.

Key Features and Benefits

The ZM5202AE-CME3R is a powerful and reliable Z-Wave® transmitter module because it has a number of useful features and benefits. Here are some important features and the rewards they bring:

  • Low Power Consumption: The ZM5202AE-CME3R is made so that it uses little power. This function makes sure that the module saves energy and extends the battery life of devices that use it. It is especially helpful for smart home automation and IoT apps that use battery-powered devices.
  • Long-Range contact: The ZM5202AE-CME3R makes long-range wireless contact possible with its strong communication features. This lets devices keep a strong and reliable link over a long distance, making it possible for them to work smoothly even in big spaces or hard environments.
  • Compatibility with the Z-Wave® Wireless Protocol: The module is fully compatible with the Z-Wave® wireless protocol, which is widely used in the smart home business. This makes it work with a wide range of Z-Wave® devices, giving users the freedom to build smart home solutions that are complete and work well together.
  • Integrated Antenna variety: Some versions of the ZM5202AE-CME3R may have integrated antenna variety. This advanced feature makes it easier for signals to be received and sent by using multiple antennas to reduce the effects of multipath fading and improve overall communication.
  • Advanced Modulation Schemes: The ZM5202AE-CME3R uses advanced modulation schemes to improve its performance and dependability. These methods improve the way data is sent, use the spectrum more efficiently, and make sure that communication works well even when there is noise or interference.

The ZM5202AE-CME3R makes it possible to build efficient and reliable wireless systems by taking advantage of its low power usage, long-range communication, and compatibility with the Z-Wave® wireless protocol. The module’s performance and dependability are further improved by features like integrated antenna diversity and advanced modulation schemes. With all of these features, the ZM5202AE-CME3R is a great choice for smart home management, Internet of Things (IoT), and wireless control applications.

Operating Principles

The ZM5202AE-CME3R is based on the Z-Wave® wireless protocol and uses a transceiver module to allow wireless communication within a Z-Wave® network. Here’s a summary of how it works from the inside:

  • Function of the Transmitter: The ZM5202AE-CME3R changes the frequency of the carrier signal when it sends data. It turns the computer data into a modulated waveform that can be sent wirelessly. This modulation method makes sure that data can be sent quickly and keeps interference to a minimum.
  • Receiver Function: When the ZM5202AE-CME3R is in receiver mode, it picks up the modulated signal that comes in and demodulates it to get the data that was sent. The demodulation method takes the received signal and gets back the original digital information.
  • Data Encoding and Decoding: The ZM5202AE-CME3R uses sophisticated data encoding methods to make sure that data transmission is reliable and error-free. It adds mistake detection and correction codes to the data, which makes the information sent more reliable. On the other end, the module decodes the data and checks for errors to make sure the data is correct.
  • Implementing the Protocol Stack: The ZM5202AE-CME3R has a full application of the Z-Wave® wireless protocol’s protocol stack. The physical layer, data link layer, network layer, and application layer protocols are all part of this stack. Each layer does its own thing to make network connection, device discovery, routing, and interactions at the application level easier.

By combining these ideas, the ZM5202AE-CME3R makes it possible for a Z-Wave® network to communicate wirelessly without any problems. Its transmitter function modulates and sends data, and its receiving function demodulates and pulls out the information it has received. The techniques of encoding and decoding data make sure that the data is correct, and the implementation of the protocol stack takes care of the different levels of communication within the network.

Applications and Use Cases

The ZM5202AE-CME3R can be used in many different fields:

  • Smart home automation lets you handle smart devices like lights, thermostats, and locks without any hassle, making your home a connected and automated place to live.
  • Security Systems: Add the module to intrusion detection, access control, and surveillance systems for reliable wireless connections and real-time tracking.
  • Energy Management: Use smart meters, power tracking devices, and appliances to track and control how much energy is being used. This helps save energy and protect the environment.
  • Industrial tracking: Make it easier for sensors, actuators, and control systems to send and receive data wirelessly, which improves tracking of equipment and process control.

Advantages of the ZM5202AE-CME3R

  • Reliable and Secure Wireless Networks: Using the Z-Wave® algorithm makes sure that communication is stable and that signal interference and data loss are kept to a minimum.
  • Long Battery Life: A design that uses less power makes the battery last longer, which is perfect for battery-powered gadgets that are used in remote places.
  • Interoperability and Ecosystem Compatibility: Being compatible with the Z-Wave® standard makes it easy to connect to a wide range of Z-Wave® devices, which gives you options for customizing your system.

By taking advantage of these benefits, the ZM5202AE-CME3R lets developers make wireless communication systems for smart homes, security, energy management, and industrial monitoring that are reliable, safe, and use less energy.Top of Form


In the end, the ZM5202AE-CME3R is an important Z-Wave® receiver module that works at 868MHz and has a lot of useful features. It is a must-have for smart home management, Internet of Things (IoT), and wireless control applications because it uses little power, can communicate over a long distance, and is compatible with the Z-Wave® wireless protocol. Its small size and surface mount package make it more flexible and make it easier to use in different designs.

If you need help or have questions, don’t be afraid to reach out to the skilled team at ICRFQ. We are committed to giving you tips and information that will help you get the most out of the ZM5202AE-CME3R and get the results you want.

4.8/5 - (397 votes)
Kevin Chen